Thread Number: 21733
Is anyone interested in this Maytag 806?
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 341978   4/13/2009 at 01:25 (5,464 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        

revvinkevin's profile picture
!775 Maytag 806 (white) for sale!

Before you ask.... yes this is the same 806 I had for sale over a month ago. Yes I did sell it, but the current owner likes his somewhat newer, electronic controlled Maytag washer (due to the large amount of cycle customization available.

It's in very good condition and only has a couple small paint chips on the front panel edge.

I replaced the belts and the air-gap, fill flume.

Anyone interested? Please e-mail me, THANKS!
Kevin





Post# 341979 , Reply# 1   4/13/2009 at 01:25 (5,464 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        

revvinkevin's profile picture


Post# 341980 , Reply# 2   4/13/2009 at 01:26 (5,464 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        

revvinkevin's profile picture
The interior.........

Post# 341981 , Reply# 3   4/13/2009 at 01:27 (5,464 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        

revvinkevin's profile picture
Panel close up...........

Post# 341982 , Reply# 4   4/13/2009 at 01:28 (5,464 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        

revvinkevin's profile picture
AND.... the money shot!!!
(for me)


Post# 342024 , Reply# 5   4/13/2009 at 09:18 (5,463 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
OOPS! Typo... wow!

revvinkevin's profile picture
Obviously I meant to say it's a 1975 - NOT a !775... LOL

Kevin


Post# 342063 , Reply# 6   4/13/2009 at 11:39 (5,463 days old) by mistereric (New Jersey (Taylor Ham))        

mistereric's profile picture
If it was on this side of the USA, i would have a home for it in a hot minute.

Post# 342088 , Reply# 7   4/13/2009 at 13:34 (5,463 days old) by wigwag (San Diego)        
I'll take it!

How much do you want for it?

Post# 342101 , Reply# 8   4/13/2009 at 14:49 (5,463 days old) by gocartwasher ()        
Looks like it`s in great condition

Very nice would make someone geeaat collector piece

Post# 342105 , Reply# 9   4/13/2009 at 15:03 (5,463 days old) by maytagluver ()        
sure like to have that machine

I'd be quite interested in this, but I'm not sure where they make pink hot dogs.



Post# 342109 , Reply# 10   4/13/2009 at 15:38 (5,463 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
Not sure where Pink's is? How about Mickey Mouse or the

revvinkevin's profile picture
I'm just south of Los Angeles.

Post# 342110 , Reply# 11   4/13/2009 at 15:44 (5,463 days old) by toggleswitch2 ()        

clue.

CLICK HERE TO GO TO toggleswitch2's LINK


Post# 342141 , Reply# 12   4/13/2009 at 19:55 (5,463 days old) by xraytech (Rural southwest Pennsylvania )        

xraytech's profile picture
I would also like to have that machine, how much and what would shipping cost to zip code 15312

Post# 342162 , Reply# 13   4/13/2009 at 22:07 (5,463 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
I am not a shipper, but........

revvinkevin's profile picture
Someone else from PA e-mailed me about the washer and said he got a quote from Craters & Freighters for $900!!! YIKES!!!

Post# 342167 , Reply# 14   4/13/2009 at 22:14 (5,463 days old) by peterh770 (Marietta, GA)        

peterh770's profile picture
Someone in Chino Hills should be contacting you...

Post# 342182 , Reply# 15   4/14/2009 at 00:32 (5,463 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
Sold...?

revvinkevin's profile picture
It looks like this 806 is sold!

Post# 342355 , Reply# 16   4/14/2009 at 20:30 (5,462 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
Nope... not sold... this 806 is still for sale!!!

revvinkevin's profile picture
OK, this Maytag 806 is STILL available for purchase!!!

I am sorry to say the person who intended to buy this machine had to cancel due to unforeseen circumstances.

Hello Chino Hills….. calling Chino Hills…. are you there?? You're next!


Post# 342358 , Reply# 17   4/14/2009 at 20:56 (5,462 days old) by peterh770 (Marietta, GA)        

peterh770's profile picture
I am reaching thru the phone to deliver a slap we speak...

Post# 342451 , Reply# 18   4/15/2009 at 07:27 (5,462 days old) by dblrinz ()        

Come on, Come on!

This is a beautiful Machine! I realize that C.D. Maytags pull at my heart strings, but this machine is a couple of chips away from mint...So in my opinion MINT! AND Kevin is so nice and accomodating to work with...

Yeah - I was the idiot trying to come up with the money and rationale to pay $900 to have shipped to Pittsburgh...I know I should be able to find one out here, but they are not popping up on Craigs List around here. Should have bought TrainGuy's 900's, but had just purchased a new Alliance Speed Queen...


Post# 342469 , Reply# 19   4/15/2009 at 09:47 (5,461 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture
Wow, 900 dollars? I would wager a bet that Youcrate would be about a third of that.

Hopefully this beaut to goes good hands!

Ben


Post# 342478 , Reply# 20   4/15/2009 at 10:37 (5,461 days old) by kenmoreguy64 (Charlotte, NC)        

kenmoreguy64's profile picture
Here's an idea for the east-coasters:

If you want to work out arrangements with Kevin to get the machine to Phoenix, I will take care of bringing it to Charlotte free from there, and you can pick it up here if that makes things easier! It won't deliver over-night (might take a month or so to get it to Charlotte once in Phoenix), but cheap is cheap!

Gordon


Post# 342487 , Reply# 21   4/15/2009 at 11:15 (5,461 days old) by dblrinz ()        
YouCrate

Received a quote from YouCrate of $393.35 which may put the machine back in play for me!

Gordon - Wow what a GREAT offer! This could open many more opportunities! THANK YOU!


Post# 343546 , Reply# 22   4/19/2009 at 17:19 (5,457 days old) by gadgetgary (Bristol,CT)        
Bump

gadgetgary's profile picture
So has that wonderful machine sold yet?

Post# 343554 , Reply# 23   4/19/2009 at 18:33 (5,457 days old) by rickr (.)        

rickr's profile picture
Sure hope someone goes for this machine! They are getting rare to find these days... (unless you might live around Newton Iowa) <:

Post# 343557 , Reply# 24   4/19/2009 at 18:41 (5,457 days old) by revvinkevin (Tinseltown - Shakey Town - La-La Land)        
tenatively sold......

revvinkevin's profile picture
Evan ( new to AW.org) in PA has spoken for 806.

Post# 343561 , Reply# 25   4/19/2009 at 18:43 (5,457 days old) by rickr (.)        

rickr's profile picture
I am glad to hear that!

Post# 343627 , Reply# 26   4/20/2009 at 00:18 (5,457 days old) by strongenough78 (California)        

strongenough78's profile picture
I would have loved to buy that had I had the money and place to put it lol. And I could have borrowed a truck to bring it home.......sigh.....oh well. I've noticed lately, that even though I truly want a 71 Lady K or 76 Whirlpool, the more and more I watch videos and see pictures of the Maytag A806, I'm wanting one lol.

Post# 343653 , Reply# 27   4/20/2009 at 07:31 (5,457 days old) by dblrinz ()        
Kevin

Definitely want it! Sent you an email Friday regarding particulars. Have you received it? Please let me know!



Post# 343700 , Reply# 28   4/20/2009 at 12:07 (5,456 days old) by bosch2460 (Harrisonburg, VA)        

bosch2460's profile picture
I would love to have it too.....its a dream machine for me. :) But so far away........ Dunno what it would cost to ship that bad boy. :)


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy