Thread Number: 23176
What happened in this dryer????
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 361629   7/4/2009 at 10:05 (5,402 days old) by maytagwc401 ()        

This is the inside of a portable Whirlpool dryer, for sale on the web, in Texas.

What happened in there? I never saw such damage in a dryer. And who in their right mind would buy a dryer like that. Or even think of putting their clothes in there.
What do think?

Serge





Post# 361630 , Reply# 1   7/4/2009 at 10:13 (5,402 days old) by bertrum ()        

the enamel paint has come off, easy repair job.

Post# 361671 , Reply# 2   7/4/2009 at 14:48 (5,402 days old) by whirlcool (Just North Of Houston, Texas)        

And who in their right mind would buy a dryer like that. Or even think of putting their clothes in there.

You'd be surprised at what I see people do down here. A lot of them just don't care or don't have any common sense at all.

I consider this dryer a redneck special. Just take it home, set it up on a extension cord in front of your trailer and just wash and dry away!


Post# 361675 , Reply# 3   7/4/2009 at 15:00 (5,402 days old) by spankomatic (Ukiah,CA)        

spankomatic's profile picture
Maybe they thought it was a FRONT LOADER washer.... Put the clothes in,get the garden hose and fill it up. Ya gotta wonder......

Jim


Post# 361679 , Reply# 4   7/4/2009 at 15:15 (5,402 days old) by maytagwc401 ()        

you guys are funny!! We should have an appliance convention one day!!!

Post# 361681 , Reply# 5   7/4/2009 at 15:27 (5,402 days old) by laundromat (Hilo, Hawaii)        

laundromat's profile picture
I see this all the time. Sometimes,the washer does not spin veryfast and the humidity caused during the dry cycle(timed instaed of automatic sensor drying)as well as damp clothes that need more time to dry,the PAINTED INTERIOR as aposed to STAINLESS STEEL OR PORCELAIN,oxydises and begins to rust. Ouside instalation also contributes to this oxydation.

Post# 361683 , Reply# 6   7/4/2009 at 15:28 (5,402 days old) by yogitunes (New Jersey)        

yogitunes's profile picture
we have trailer parks around here, and they have the washer and dryer on the front porch/deck, hooked up and running, I stopped by one day cause I thought they were throwing them out, and they were in use, no roof overhead, all year around, rain or shine, unbelievable!

Post# 361708 , Reply# 7   7/4/2009 at 19:00 (5,402 days old) by supremewhirlpol ()        

I'd have to say a washer and dryer being used outside can't last very long.

Post# 361714 , Reply# 8   7/4/2009 at 19:48 (5,402 days old) by qsd-dan (West)        
Interesting

qsd-dan's profile picture
My 1981 series 70 Kenmore gas dryer has less than 5% of the paint left on the drum, yet no rusting issues.

Post# 361777 , Reply# 9   7/5/2009 at 03:35 (5,401 days old) by whirlcool (Just North Of Houston, Texas)        

In college I rented a house that had the washer in the kitchen and the dryer out on the back porch, uncovered. It was an electric model. Even though the landlord said it was safe to use on rainy days, I never would. The though of touching an electric dryer out in the rain just seemed kind of dangerous. It was a Gibson dryer with a Norge washer in the house.

Post# 361805 , Reply# 10   7/5/2009 at 07:56 (5,401 days old) by toggleswitch2 ()        

Oh that is easy. It's damage from dryer-sheet softeners.
Promotes corrosion, paint damage and fires galore.

There is a REASON dryer manufacturers weoudl not recommend and DISCOURAGES their use for YEARS early-on.

However when the industry relaized how much money was to be made with dryer-softener sheets, dryer mannies were somehow persuaded to simply say, use a metal vent hose and all will be jolly. NOT!


Post# 361810 , Reply# 11   7/5/2009 at 09:15 (5,401 days old) by davek ()        
!

I recognize that as the portable like I've got. Going by that lint filter's color, that one has been VERY HOT! The plastic looks scorched.

I'm no expert about that kind of stuff, but it's gotta be abuse.


Post# 361867 , Reply# 12   7/5/2009 at 13:04 (5,401 days old) by maytagwc401 ()        

The screen where the hot air enters the dryer is also scorched. I think it's been abused too. My full size Whirlpool has been running for 10 years, and that screen is still shiny.

Post# 361964 , Reply# 13   7/5/2009 at 20:06 (5,401 days old) by qsd-dan (West)        

qsd-dan's profile picture
I'm not sure if it was abuse or malfunction, like a stuck thermostat that burned the clothes. The high limit thermo's on these machines have a ridiculously high temp reading before they cycle. Usually the clothes will burn a little before it kicks in.

Post# 361987 , Reply# 14   7/5/2009 at 22:06 (5,401 days old) by danemodsandy (The Bramford, Apt. 7-E)        
In Addition....

danemodsandy's profile picture
....To the other possible causes mentioned already, heavy loads of work clothes can contribute to enamel wear. Coveralls and other stuff with rivets, heavy zippers, scratchy fabrics, etc., can wear the paint away.

Looks like you could have found a Workin' Man's Special....


Post# 362011 , Reply# 15   7/6/2009 at 00:43 (5,400 days old) by vintagesearch ()        
wow

well i actually seen this too!!! when my brother bought a home in hopewell junction the house came with a kenmore paired washer and dryer the dryer interior look like this paint mostly scratched off the back of the drum it was dark blue and green were the paint was left the drums vanes were dingy and brown and that damn thing took forever to get things dry we would have to run it 2x @ 70 minutes to get it to fully dry clothes at least it never burned them!!! but yea ive seen this before LOL

Post# 362094 , Reply# 16   7/6/2009 at 13:49 (5,400 days old) by jeffg ()        

I'd bet a box of doughnuts this dryer had clogged or damaged venting. Same goes for the "have to run it 2x @ 70 minutes" post.

Post# 362137 , Reply# 17   7/6/2009 at 16:19 (5,400 days old) by tristarcxl ()        
2x @ 70 minutes

I've had 2 Whirlpool/Kenmore dryers and they both took an eternity to dry a load. I grew up with Maytag dryers, so I was spoiled by a 45 minute dry cycle. Both of the dryers I've had were vented directly outside through a short 5" duct. Straight shot and clear venting. It was very common to have the dryer run for 1.5+ hours to dry a load....even out of the front loader.

Now there's a Maytag HOH dryer in there that's the same wattage and vented through the same ductwork. I can take a full/packed load of towels washed in the Filter-Flo and they're dry in less than an hour. We're talking DRY.....not "dry-ish".


Post# 362146 , Reply# 18   7/6/2009 at 16:36 (5,400 days old) by cornutt (Huntsville, AL USA)        

I have to concur about the Whirlpool/Kenmore stationary-back dryers. There's something funny about the air circulation in them. I don't know what it is, but I had a 1991 model that took forever to dry. I never really thought about it until I got married and my wife started complaining about it. Our GE Harmony dryer now dries most loads in about 25 minutes... of course, that 1000-RPM spin from the washer helps. Actually, that might be one reason the Whirlpool dryers are so slow...


Post# 362151 , Reply# 19   7/6/2009 at 16:40 (5,400 days old) by joelippard (Hickory)        
I agree

joelippard's profile picture
these dryers are well made, but it takes them a little longer than some others. There is a noticable difference in dry time between mine and the 1-18 dryer.

Post# 362858 , Reply# 20   7/9/2009 at 15:43 (5,397 days old) by maytagwc401 ()        

The Whirlpool with the stationary back have been in production since the late 60's. That's like 40 years. I don't see anything wrong with that design. The hot air comes in the drum on the side where the clothes have already started to tumble down, and the lint is removed where the clothes are climbing up the drum. I think they are extremely efficient. I dry big loads of clothes (like jeans and t-shirts, socks, underwear, sweatpants) in the 6.5 cubic foot model, using Low Heat auto cycle.(no moisture sensor). And the machine stops by itself in about 55 minutes, and everything is dry. Using low heat. I think they are great machines.

Post# 362862 , Reply# 21   7/9/2009 at 16:10 (5,397 days old) by kinnakeettom ()        

JeffG pegged it. poor vent and a painted surface.
repaint and drum and bulkhead good as new


Post# 362864 , Reply# 22   7/9/2009 at 16:21 (5,397 days old) by kenmorekeith ()        
Long dry time

This is my Dryer a 2year old Maytag 7.5 cubic ft drum Made by whrilpool.Its one of the best dryers I have ever had next to my kenmore. I love kenmore dryers and hane owned them for years and never do I have long dry times.

Post# 362871 , Reply# 23   7/9/2009 at 16:39 (5,397 days old) by soberleaf ()        
actually i like the idea

of having a washer and dryer on the front porch, i see that in the country once in awhile around here also. but then again i was never one to really give a sh*t what anyone thinks, especially when it concerns what i do! and if i lived in a mobile home (aka trailer) and i wanted a washer in the front yard i would do it! critics be damned!

i have that model dryer, i got it at a yard sale for 10 bucks a couple years ago and i use it as my main dryer. i have 3 dryers and that portable whirlpool model is my favorite! it can be run on 120 or 240 and i have used it both ways. 240 volts is better ofcourse! quicker at least. the tub on mine is not in nearly as bad a shape but has several areas where it is starting to show it's age also.

that tub is a rusty looking but hey, i would use it, even to the point of putting my clothes in it (gasp!!!) it's not that bad! there are a lot of people who are not fortunate enough to even have a dryer and would probably love to have little dryer, rusty tub and all.! if i wanted it i would buy it and use it just as it is. who cares what anyone else thinks about it!



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy