Thread Number: 23705
Speed Queen |
[Down to Last] |
Post# 369056   8/2/2009 at 11:16 (5,378 days old) by lindam ()   |   | |
Checkrate/Likes
 
     
I have a speed queen wringer washer that will not agitate. Please, I need assistance as to how to repair or where I can find a schematic of the motor. Thanks |
|
Post# 369170 , Reply# 1   8/3/2009 at 00:00 (5,378 days old) by volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
|
Post# 369306 , Reply# 2   8/3/2009 at 14:24 (5,377 days old) by lindam ()   |   | |
Checkrate/Likes
 
     
Not sure what you mean by knob. There is a on/off switch in the front and it is in th on position. WHere is the knob? Thanks |
Post# 369339 , Reply# 3   8/3/2009 at 17:02 (5,377 days old) by volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
It is a rotary switch that pulls or pushes a rod behind it that moves a lever on the transmission. The motor should run whenever the cord is plugged in. The on/off knob just engages or disengages the transmission. There is a similar knob on the front of the washer for the pump. Try reaching behind the washer's leg with the agitation knob and moving the rod or the lever it attaches to on the transmission. Dave |
Post# 369577 , Reply# 4   8/4/2009 at 14:44 (5,376 days old) by lindam ()   |   | |
Checkrate/Likes
 
     
Oh, I will try Thanks again |