|
Thread Number: 24053
My Zanussi FJS1225 is on the blink |
[Down to Last] |  |
| Post# 373984 8/23/2009 at 09:37 (5,351 days old) by zanussi_lover (Nottingham, UK) | ||
I think the pcb is going on my Zanussi as i keep getting E90 coming up on my washer, whenever i come to switch the machine on, i usually get the - - - three dashes in the time remaining bubble but recently i turn it on and for about 5 seconds theres nothing in the display, or no lights, then E90 flashes up i've read that E90 means a fault with the electronic. This machine is 8 years old, so its probably had a good run I told myself i would never get a brand new machine to replace it, so i guess i'm going to get a second hand reconditioned machine I reckon I'll probably get an old Hoover, Aeg, Zanussi or Tricity Bendix. | ||
|
| Post# 373986 , Reply# 1 8/23/2009 at 09:45 (5,351 days old) by rolls_rapide (.) | ||
|
It could just be that one of the interconnectors between the boards has got corrosion. Have you tried unplugging connectors and putting them back again? | ||
| Post# 373987 , Reply# 2 8/23/2009 at 09:47 (5,351 days old) by rolls_rapide (.) | ||
|
This machine is 8 years old, so its probably had a good run Oooh! That's ominous. Mine was eight years old. | ||
| Post# 373990 , Reply# 3 8/23/2009 at 10:09 (5,351 days old) by zanussi_lover (Nottingham, UK) | ||
|
Yeah | ||
| Post# 374000 , Reply# 5 8/23/2009 at 11:36 (5,351 days old) by zanussi_lover (Nottingham, UK) | ||
|
pcb | ||
| Post# 374007 , Reply# 7 8/23/2009 at 12:04 (5,351 days old) by zanussi_lover (Nottingham, UK) | ||
|
well | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
