Thread Number: 26723
The New Hotpoints |
[Down to Last] |
Post# 410436   1/28/2010 at 22:41 (5,172 days old) by macboy91si (Frankfort, KY)   |   | |
Checkrate/Likes
 
     
I just landed some mid 80's Hotpoint Rim-Flo's this week and have been working on cleaning them up. They were part of an estate sale and the washer hadn't been used in some time and the dryer the same. When these were originally posted on CL they both still had the Energy guide and Hotpoint feature stickers but for some reason they were removed, which sort of sucked. Surprisingly, these are hard to find around here and I've been looking for a set for some time. I recently sold off my newer style GE Commercial set and these are a much welcomed replacement. I spent most of the day cleaning the dried lint crap out of the washer and cleaning the filter ring and testing out the machine. I have posted a link to an introduction vid, I'll upload some pics and vids this weekend. The vid is after cleaning, which turned out well. CLICK HERE TO GO TO macboy91si's LINK |
|
Post# 410468 , Reply# 1   1/29/2010 at 00:12 (5,172 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
macboy91si, I'm going to send you an email, look out for it. scrubflex |
Post# 410482 , Reply# 2   1/29/2010 at 00:54 (5,172 days old) by vintagesearch ()   |   | |
Checkrate/Likes
 
     
i dig it! |
Post# 410591 , Reply# 3   1/29/2010 at 12:17 (5,172 days old) by jaytag (Atlanta)   |   | |
Checkrate/Likes
 
     
I picked up a WLW 5700 Programmed Washing model. Does anyone have the owner's manual for this? This model does cycles that I ve never seen before. Two rinses on the Extra Duty cycle. Rapid Wash? |
Post# 410750 , Reply# 4   1/29/2010 at 21:04 (5,171 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
Jaytag, I think this might be the washer I was looking for on the other thread. Can you tell me if the agitator is a (straight 4-vane) agitator? PLEASE post pictures of your washer. |
Post# 410752 , Reply# 5   1/29/2010 at 21:26 (5,171 days old) by jaytag (Atlanta)   |   | |
Checkrate/Likes
 
     
Here are the pics. |
Post# 410754 , Reply# 6   1/29/2010 at 21:30 (5,171 days old) by jaytag (Atlanta)   |   | |
Checkrate/Likes
 
     
next try |
Post# 410755 , Reply# 7   1/29/2010 at 21:32 (5,171 days old) by jaytag (Atlanta)   |   | |
Checkrate/Likes
 
     
Not straight vane but has the handwash two in one. |
Post# 410772 , Reply# 8   1/29/2010 at 22:17 (5,171 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
Jaytag but, it's not the washer. I think it is probably a late 70's, early 80's Hotpoint. Thanks again. |
Post# 410773 , Reply# 9   1/29/2010 at 22:18 (5,171 days old) by supremewhirlpol ()   |   | |
Checkrate/Likes
 
     
I had the same one! Got rid of it in 2004 because the boot ruptured. |
Post# 410779 , Reply# 10   1/29/2010 at 22:33 (5,171 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
Hey Supremewhirlpol, was it too hard to replace the boot? Oh! yeah, check your emails. Harry |
Post# 410785 , Reply# 11   1/29/2010 at 23:03 (5,171 days old) by volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
The boot is pretty easy. I did it on my FF. 1st, open the top. 2nd, remove the agitator. 3rd, remove the plastic cover over the base of the agitator shaft. 4th, remove the bolts on the BOTTOM of the wash tub. (use a 12 point socket, not a 6 point). 5th, Remove the inner tub, being careful of the fill and recirculation flumes. The boot is now exposed. It is held on by 2 big hose clamps. The originals aren't a great design, just get new ones from your local hardware store. Often the boot slips out of the clamp and is not damaged. Clean everything before reassembly. Dave |
Post# 410971 , Reply# 12   1/30/2010 at 17:31 (5,170 days old) by supremewhirlpol ()   |   | |
Checkrate/Likes
 
     
I probably could have reseated the boot, but at the time, I had 24 washing machines(which is too many) and it had to go. |
Post# 1141907 , Reply# 13   2/11/2022 at 14:16 (775 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
|
Post# 1141909 , Reply# 14   2/11/2022 at 14:30 (775 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
1    
I had one of these very, very briefly! That program switch was the Hotpoint dial equivalent of the pushbutton fabric programs on a GE - the setting would determine the combination of wash and spin speeds and water temperatures. For instance - the 'Cottons Colorfast' setting was for a hot wash, cold rinse with regular wash and spin speeds, 'Knits Delicates' had warm wash, cold rinse and a gentle wash with a regular-speed spin.
I should have tried harder to fix that machine, dammit... |
Post# 1141921 , Reply# 15   2/11/2022 at 16:52 (775 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
1    
Neat!
But why did they call it a programmed cycle rather than just calling it hot wash fast/fast, warm wash fast/slow, ect. Marketing? I always love all the different ways manufacturers would present the various combinations of speeds, cycle time, temps, and the like. I think Hotpoints are among the most beautiful in design btw. Perhaps influenced by all the memories. |
Post# 1141923 , Reply# 16   2/11/2022 at 17:05 (775 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|
Post# 1141926 , Reply# 17   2/11/2022 at 17:34 (775 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
|
Post# 1141930 , Reply# 18   2/11/2022 at 18:15 (775 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
1    
The Viking washers were a curious blend of Hotpoint and GE... They had programmed pushbutton cycles on the really fancy models and several models offered a mini-basket, but they also had the Hotpoint side-opening lid and ridged dials for water level and temperature selection on the non-programmed models. I really wish I'd had the horse sense to photograph some of the Vikings that I've owned or used over the years... |
Post# 1141951 , Reply# 19   2/12/2022 at 06:41 (775 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
|
Post# 1141965 , Reply# 20   2/12/2022 at 10:57 (775 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
The machines were made at the CAMCO (Canadian Appliance Manufacturing Company) plant in my native town of Montréal, Québec. I could drone on for ages about the differences and subtleties of the Canadian-built appliances, but to try to sum up, it was done to be able to offer them at a lower price to the Canadian market (there were tarriffs and duties on items imported from the USA back then and these were added to the retail price). |
Post# 1141976 , Reply# 21   2/12/2022 at 13:56 (774 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
Do you or anyone have pictures of those differences?
This is so fascinating. I love subtle differences between various brands like GE and Hotpoint. So similar, yet sometimes so different. I've gotten the notion that while global standards had to be followed, it seems like engineers also had discretion for each brand resulting in evolutionary forks. |