Thread Number: 28669
quick trip to buffalo nets 4 dishwashers and a maytag!!! |
[Down to Last] |
Post# 437706   5/26/2010 at 22:29 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
i went to buffalo/rochester last week to pick up a g.e. mobile maid i bought last year on e bay for a buck!
i ended up bringing back 4 dishwashers and a surprise maytag a606 washing machine that was on craigs list for free! here's some pics for anyone interested. the people i met and picked up from wanted to see them as well! here goes! the truck i was supposed to rent ended up being a chevy van! it worked out better that way as it rained all the way to buffalo and back! |
|
Post# 437707 , Reply# 1   5/26/2010 at 22:31 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437708 , Reply# 2   5/26/2010 at 22:33 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437711 , Reply# 3   5/26/2010 at 22:40 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437712 , Reply# 4   5/26/2010 at 22:42 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437714 , Reply# 5   5/26/2010 at 22:48 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437715 , Reply# 6   5/26/2010 at 22:52 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437716 , Reply# 7   5/26/2010 at 22:55 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437718 , Reply# 8   5/26/2010 at 22:59 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437719 , Reply# 9   5/26/2010 at 23:04 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437723 , Reply# 10   5/26/2010 at 23:07 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437724 , Reply# 11   5/26/2010 at 23:08 (5,055 days old) by gansky1 (Omaha, The Home of the TV Dinner!)   |   | |
Checkrate/Likes
 
     
|
Post# 437726 , Reply# 12   5/26/2010 at 23:10 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
in coppertone but i just love these old g.e.'s so much i wanted a spare!
i remember looking at these in the 60's whenever i went to an appliance store! i was fascinated by that spray arm with those huge water jets! this one will have to wait awhile before i get to rebuilding it, probably this winter. |
Post# 437727 , Reply# 13   5/26/2010 at 23:22 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437728 , Reply# 14   5/26/2010 at 23:25 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437729 , Reply# 15   5/26/2010 at 23:28 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437730 , Reply# 16   5/26/2010 at 23:33 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
nite before i left i scanned craigs list in buffalo/rochester and saw this advertised for free!
i've always wanted a maytag in spite of the fact that frigidaire is my all time favorite brand. i know nothing about it but am learning fast! gonna do a seperate post on this little gem! i will say it runs great and only has two minor problems. a small leak around a bolt in the outer tub and a timer motor problem that i am working on. it's a a606 and larry in parma told me it was made between 1967 and 1973. he said it is the best model they ever made. i don't know but i sure love it! and it's harvest gold! i can't handle any more white! |
Post# 437733 , Reply# 17   5/26/2010 at 23:37 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437735 , Reply# 18   5/26/2010 at 23:41 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
matches the outer cabinet almsot exactly! i thought this was made that way but larry told me the inner is really white and that is a major hard water stain all over it!
i like it better this way so i'm leaving it. the people thought it was only about 10 years old and i told them it was more like 40. i didn't feel right just taking it so i gave them 50 bucks at least! |
Post# 437737 , Reply# 19   5/26/2010 at 23:52 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
headed back towards cleveland. i was too cheap to pay for a motel so i pulled into a rest stop in erie pa. and slept in the van, all curled up next to these apliances!
angela in new york was nice enough to give me a blanket to keep me warm! thanks angela! you are a very nice lady and i enjoyed meeting you and everyone else! |
Post# 437738 , Reply# 20   5/26/2010 at 23:55 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437739 , Reply# 21   5/26/2010 at 23:57 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437741 , Reply# 22   5/27/2010 at 00:02 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
cleveland for my last machine pick up were only minutes from larry's shop!
they were a very nice couple and i bought this old g.e. impeller machine from them. the gentleman told me it was his mother's and had been stored in the attic for about 40 years! he said as a kid he used to go up in the attic with his brother and look at it! his parents want to see it running again and i'm gonna do a seperate thread on it when it's done! |
Post# 437744 , Reply# 23   5/27/2010 at 00:11 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
rebuilding this machine and it is in great shape for it's age!
the inside was full of 40 years of dirt and the impeller will have to replaced but the essentials are fine! motor is in great shape! i finished it's tune up yesterday! the tub cleaned up beautifully! looks like new! i have a d&m impeller i was actually able to modify to fit this g.e. so it's got a new impeller on it now! the drain valve and both hoses are in great shape! this machine will run again, very soon and these nice people will get their wish! their parent's will see it all rebuilt, looking great and running! |
Post# 437745 , Reply# 24   5/27/2010 at 00:13 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437746 , Reply# 25   5/27/2010 at 00:18 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
tuned up the motor and drain pump and scrubbed and scrubbed like joan crawford on the tub! "nothing is clean!!!!!!!!!"
wanna bet! it shined up like new! i was amazed. i used a combination of degreaser, lime away, and comet! that blue tape is painters tape over all the openings as i painted the underside of the tub and drain tube with rustoleum rusty metal primer. it's underside will get a fresh coat or two of white paint before i reassemble it! |
Post# 437747 , Reply# 26   5/27/2010 at 00:22 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437750 , Reply# 27   5/27/2010 at 00:24 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437751 , Reply# 28   5/27/2010 at 00:31 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
and i'm saving them for last! i think they will clean up very well! i hope!
anybody have any tips please let me know! all in all i love this machine and really wanted it when i saw it advertised here. it is my 3rd impeller machine, i have the bowtie g..e. from toledo, the modern maid from the church in grand rapids and now this little guy from cleveland! and to the people i bought it from (i know you are reading this) thanks a lot! i enjoyed meeting you and will keep you posted on it's rebuild! i will put a video of it on you tube when i'm done and let you know when i do the threacd on it's rebuild here on the site! you cleveland folks are always very nice, i have gotten quite a few machines fron northern ohio! |
Post# 437752 , Reply# 29   5/27/2010 at 00:36 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
hope eveyone who reads this enjoys it!
this is probably my last road trip ever! the only thing that could possibly tempt me to do another would be a norge timeline unimatic pulsamatic mutimatic another rollermatic another 1-18 frigidaire spin tube another kitchenaid that tappen dishwasher with the rolling pin for a spray arm guess that's my future wish list! thanks for lookin! |
Post# 437753 , Reply# 30   5/27/2010 at 00:51 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
i have a hotpoint front load impeller machine in virginia that i bought for 20 bucks off e bay last year waiting for me to pick up! guess i'll run down there this summer. i can throw it in the jeep.
hey gansky, you asked about the frigidaires. i rebuilt the slant top last summer and used it for about a week. it was noisy as all get out and wasn't that great of a performer compared to my kitchenaids. nothing wrong with it but it wasn't exceptional in any way so i put it in the collection. i will probably use it about once a year. the front load model i got i did nothing to at all and it runs fine, only again very noisy and nothing that fantastic! i will say the best thing about them is the huge capacity of the top rack! at least on the front loaders. i have it in my kitchen and use it maybe once a month. this new one will get the test run and then probably just go into the collection. the kitchenaid, yes i am excited about using it! i have a couple front load kd-12's that i love and a kd-14 i have not really used yet. this is my first top loader of the old hobart design but if it's anything like the kd-12 i use everyday i will love it! i'm not going to use it till i tear it apart and check the pump and motor etc. sometime later this summer. thanks! |
Post# 437762 , Reply# 31   5/27/2010 at 01:40 (5,055 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
|
Post# 437765 , Reply# 32   5/27/2010 at 01:58 (5,055 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
|
Post# 437768 , Reply# 33   5/27/2010 at 05:25 (5,055 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)   |   | |
Checkrate/Likes
 
     
|
Post# 437772 , Reply# 35   5/27/2010 at 06:27 (5,055 days old) by polkanut (Wausau, WI )   |   | |
Checkrate/Likes
 
     
|
Post# 437780 , Reply# 37   5/27/2010 at 06:49 (5,055 days old) by A440 ()   |   | |
Checkrate/Likes
 
     
Hey Greg, Where did you find your Aviator? What a fantastic picture! Was it an actual ad campaign picture? It kind of looks like a painting! Would be awesome blown up and framed! Brent |
Post# 437789 , Reply# 38   5/27/2010 at 07:17 (5,055 days old) by tlee618 ()   |   | |
Checkrate/Likes
 
     
Wow Peter, I would say you had a very worthwhile trip! Very neat machines. That mixer and blender are really neat as well. The bread dough attachment really looks like it means business!! |
Post# 437805 , Reply# 40   5/27/2010 at 10:26 (5,054 days old) by autowasherfreak ()   |   | |
Checkrate/Likes
 
     
Awesome finds! You will like the Maytag. As much as I would like to have a either a belt drive Kenmore or Whirlpool. I wouldn't mind having another Maytag 606 or 806. |
Post# 437822 , Reply# 41   5/27/2010 at 11:17 (5,054 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
Wow, you really cleaned up there, Pete! The KA portable looks brand new!! Love the 54 GE Mobile maid and the newer one (60s model, I guess) looks like a lot of fun, too!!
Don't worry about those racks from the 54 Mobile Maid - the 56 pull-out in my Kitchen Centre's racks looked the same way when I first got it. They will clean up with just plain water and they will look like a million bucks!! You know, there was an apartment and town house development in the town where I grew up where all units had the Tappan Enjoy your new treasures!! |
Post# 437833 , Reply# 42   5/27/2010 at 12:25 (5,054 days old) by mickeyd (Hamburg NY)   |   | |
Checkrate/Likes
 
     
the only thing that could possibly tempt me to do another would be
a norge timeline unimatic pulsamatic mutimatic another rollermatic another 1-18 frigidaire spin tube another kitchenaid that tappen dishwasher with the rolling pin for a spray arm" Peter, you made my belly wiggle. This is so funny! And I'm not going after another washer, ever, unless.........;-D I really like the giant creamsicle colored dial and backplate on the GE, and so many other cool pics. The green "Welcome to PA" pic is especially fetching. Don't know when you came thru, but we've been having tropical weather here for many days straight." Have to go back now and review what you said about the Tapppan DW; it's what I have. |
Post# 437979 , Reply# 43   5/28/2010 at 02:31 (5,054 days old) by aldspinboy (Philadelphia, Pa)   |   | |
Checkrate/Likes
 
     
Peter congratulations on your machines !
The 1950's GE mobil maid i had an chance to get it new but never followed up on it, i did not have the support that i have now an that was in the 80's oh well . Wishing you good vibrations on your restoration work. Will you be using any of the machines ? Darren k. |
Post# 438085 , Reply# 44   5/28/2010 at 18:41 (5,053 days old) by sharples ()   |   | |
Checkrate/Likes
 
     
Hey Rollermatic...we are kinda like kissin cousins cause we found the same early GE dishwasher at the same time...i just took a pick of the insides of mine so i thought i would post. :) |
Post# 438121 , Reply# 46   5/28/2010 at 23:06 (5,053 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
gyrafoam, thanks so much for the invite! that's very nice of you. i will see when i can get to virginia this summer and let you know! i'm curious what frigidaire parts you have, i'm always trying to get more rollermatic parts. will gladly buy them! thanks again!
sharples, kissin cousins, sounds fun! i like that idea! your machine looks like it is in great shape, racks especially look much cleaner than mine. mine will be running by the end of this coming week. maybe i can help you on your's if you have any problems/questions. aldspinboy, thanks. i probably will use the kitchenaid once in a while and maybe put plexiglass on the g.e. for a novelty. the other two will be tested and rebuilt and then just stored. mickeyd, glad to make your belly wiggle! that tappan has a big rolling pin like roller in the sump that runs front to back, and it turns and picks up water and throws it around the tub. saw one in the garbage in 1969, never saw another. would love to have one! autowasherfreak, love the profile pic! yea i like the maytag already, use it almost daily. thanks. turquoisedude, let me know if you find a tappan! i am going to be calling matt in mich. this week, been really busy at work. have not talked to mark yet either. tomturbomatic, thanks for the info on the g.e. i am anxious to see how it does run. tlee618, thanks. yes that dough hook could do some serious damage! i wouldnt want to meet it in a dark alley! a440, i think the front loaders had the same spray arm from what i can see in pics. i only have seen the top loaders tioo! polkanut, not sure why it was in attic for 40 years or so. the gentleman told me he used to sneak up in the attic with his brother and they would look at it. it was his mother's. i'm assuming she didn't want a dishwasher. a bunch of my machines have come from homes where they were hardly or never used, some used as storage cabinets! toploader55, thanks for the support! |
Post# 438123 , Reply# 47   5/28/2010 at 23:08 (5,053 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
     
or a timer motor. this is the model with the permanent press cycle but the motor should be the same. everything else seems fine, drain pump included. timer motor is the main part i need.
I didn't have a chance to check out the timer when I parted out the machine. Time was of the essence at that moment. The machine was extremely clean. Either it was very well taken care of or had seen very little use. I'll take it apart and bench test the timer in a couple of days. i will pay you for it Your money is no good here ;) |
Post# 438124 , Reply# 48   5/28/2010 at 23:14 (5,053 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
i will try to help you on your kenmore questions, give me a call please!
that kd-14 was made from 11-60 thru 09-64 from the production chart. i see the kdp2 i have is from 9-58 thru 2-63. yea the 14 models were the last with the big blue cast iron spray arm. the 15 introduced the 4 way stainless hydrosweep. am curious as to what 3 you are getting! lots of pics please! |
Post# 438130 , Reply# 49   5/28/2010 at 23:24 (5,053 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
thanks, i tried to fix my timer motor but the main little gear that attaches directly to the motor and drives the other gears is broken and cannot be fixed. i can always use the washer manually but it would be fun to have it run automatically again!
so my money is no good in calif. it doesn't do nearly as good in ohio as it used to either! |
Post# 438436 , Reply# 50   5/30/2010 at 09:32 (5,051 days old) by dishwashercrazy (West Peoria, IL)   |   | |
Checkrate/Likes
 
     
|
Post# 438665 , Reply# 51   5/31/2010 at 12:18 (5,050 days old) by everythingold (Grand Rapids, Michigan)   |   | |
Checkrate/Likes
 
     
|
Post# 438729 , Reply# 52   5/31/2010 at 15:55 (5,050 days old) by rollermatic (cincinnati)   |   | |
Checkrate/Likes
 
     
it used to be my house!
gonna give you a call here later this week, still have your no. at your shop. want to know if you have anything "interesting". and any possible parts for a frigifdaire spin tube for a fellow friend here. mike, thanks, i have not begun on the racks yet, going to put the motor back in tonite and drain pump back on and run it a bit without water to see what it's cycle is like. |