|
Thread Number: 28874
Calypso Lid Switch |
[Down to Last] |  |
| Post# 440236 6/7/2010 at 22:30 (5,069 days old) by tcox6912 () | ||
|
I know this has been addressed before, but I missed it. Is it possible to use a magnet to be able to see the wash action on a calypso or do you have to bypass the lid switch? Thanks. | ||
|
Post# 440268 , Reply# 1 6/8/2010 at 00:38 (5,069 days old) by DADoES  (TX, U.S. of A.) |
||
 Calypso lid switch is a microswitch, not magnetic. The controller board must see the lid "open" after a cycle or it won't allow another cycle to start ... although unplugging the power cord has the same effect. I added a toggle switch into the lid switch harness under the console, mounted the switch in the console end cap. Toggle switch on, the lid switch is bypassed. Toggle switch off, lid switch works normally. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
