Thread Number: 29141
I fixed my dishwasher!!!!!
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 443735   6/22/2010 at 23:29 (5,055 days old) by strongenough78 (California)        

strongenough78's profile picture
Yayyyy! First a big thanks to everyone who helped point me in the right direction on how to fix my detergent door. Turns out, all it was was a spring had come off that holds the lever controlled by the timer. After a couple of attempts I finally found where it's supposed to be attached. I closed the door and turned the timer knob and presto! It works! I tried it a few times to make sure it would hold and so far so good. This is my first ever, home appliance repair. I know it's not as complicated or as major as some repairs you all have done, but I did it by myself and am very proud of myself lol. Thanks again to those who helped!




Post# 443741 , Reply# 1   6/22/2010 at 23:41 (5,055 days old) by qsd-dan (West)        

qsd-dan's profile picture
Congrats on your first repair! Hopefully it was satisfying enough to trigger a ratty wardrobe with rolled up sleeves and elbow deep into a full restoration. Ok, maybe baby steps first ;)

Post# 443744 , Reply# 2   6/22/2010 at 23:51 (5,055 days old) by strongenough78 (California)        
qsd-dan

strongenough78's profile picture
LOL hey I'm always up for a challenge. I figure if I can work on a car, then a washing machine shouldn't be too different. At least I hope. If this site had been around in 1999 and if I had better internet back then, I probably could have fixed my Mom's old Whirlpool she had since 1976. I loved that machine but it was worn out. The hot water continued to flow, I had to turn the faucet off after it started agitating. The agitation and spin were slower than they used to be and it didn't fill as high on the HIGH level as it used to. After we got the new washer, I noticed oil seeping into the tub from the bottom of the Surgilator. But what made us put it out of service to begin with, was when you pulled the knob to start it, all it did was hum. Even with all that wrong, had this site been around back then, I'd have fixed it anyway. And the same with my Grandma's 1971 Lady Kenmore. I miss those machines.

Post# 443778 , Reply# 3   6/23/2010 at 06:12 (5,055 days old) by appnut (TX)        

appnut's profile picture
Congratulations Vern!!!

Post# 443924 , Reply# 4   6/23/2010 at 17:37 (5,054 days old) by CleanteamofNY ((Monroe, New York)        

cleanteamofny's profile picture

Oh yea, a appliance mechanic in the makings!
Great job!


Post# 444025 , Reply# 5   6/24/2010 at 00:04 (5,054 days old) by whirlcool (Just North Of Houston, Texas)        

And think of the money you saved doing it yourself. Rather satisfying, isn't it?

Post# 444141 , Reply# 6   6/24/2010 at 13:32 (5,053 days old) by strongenough78 (California)        
Whirlcool

strongenough78's profile picture
This is very true. Although technically all I would have had to do was call the apartment manager and have her send out the maintenance guy. It wouldn't have cost me anything but the feeling of accomplishment I got from doing it myself is satisfying.

Post# 444184 , Reply# 7   6/24/2010 at 17:12 (5,053 days old) by duet83 ()        

For Joy FOR JOY !!

Congrats to you.



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy