Thread Number: 33254
My Unimatic is not Speaking. |
[Down to Last] |
Post# 500553   3/2/2011 at 06:19 (4,802 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)   |   | |
Checkrate/Likes
 
     
Very Strange.
I put a load in the Unimatic last night. Filled up a third of the way and stopped filling. It appears the whole machine is dead. I checked the circuit breaker and that's fine. If I advance the dial, Nothing. It worked fine a few days ago. I did press the reset button, it just appears to have No Power. Any Thoughts ? |
|
Post# 500561 , Reply# 1   3/2/2011 at 06:30 (4,802 days old) by Tomturbomatic (Beltsville, MD)   |   | |
Checkrate/Likes
 
     
I'll betcha a wire came loose. When we found the 1958, we were told it was dead, but it was just a wire off a motor terminal. |
Post# 500563 , Reply# 2   3/2/2011 at 07:08 (4,802 days old) by COMBO52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 500591 , Reply# 3   3/2/2011 at 09:35 (4,801 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
     
|