|
Thread Number: 40586
Hotpoint is dead! |
[Down to Last] |  |
|
| Post# 600471 , Reply# 1 6/2/2012 at 07:20 (4,344 days old) by aegokocarat (United Kingdom) | ||
|
ooo! patch of bad luck eh? i cannot wait to see the indesit pics when it comes :) Tom :) | ||
| Post# 600577 , Reply# 2 6/2/2012 at 17:04 (4,344 days old) by washerlover24 () | ||
|
I'm ready to put it through its paces I have a tonne of washing to do :D | ||
| Post# 601213 , Reply# 3 6/5/2012 at 14:20 (4,341 days old) by washerlover24 () | ||
|
Baad news I got the indesit today have plumbed it in and it fills with water and it does not turn I'm not sure what to do with two broken machines do any of you guys have an idea what could be wrong ? Plse help | ||
| Post# 601216 , Reply# 4 6/5/2012 at 14:25 (4,341 days old) by aquarius8000 () | ||
|
Hi Trey. It will not turn. I would suspect its the belt has broken or come off. If it is all intact( belt, pullet e.t.c)It could be a problemb with the motor but that is very unlikley. Chris. | ||
| Post# 601224 , Reply# 5 6/5/2012 at 14:46 (4,341 days old) by aegokocarat (United Kingdom) | ||
|
Trey, it could be the brushes, if you have trouble sourcing them have a look at what whirlpool are offering, i just got a whirlpool awe6517 washer and its really good :) Tom | ||
| Post# 601265 , Reply# 6 6/5/2012 at 16:42 (4,341 days old) by marthalover4eve () | ||
|
brushes most likely brushes on my new servis the brushes were installed incorrectly so i replaced them now it turns | ||
| Post# 602284 , Reply# 7 6/10/2012 at 03:38 (4,336 days old) by washerlover24 () | ||
|
It has life!!!! This morning I check to see if the indesit would roar into life for me and this morning it did its very noisy and I don't think it will last the load but I know it is the brushes as it makes a hell of a racket from that area Trey | ||
| Post# 602330 , Reply# 8 6/10/2012 at 11:08 (4,336 days old) by hotpointfan (United Kingdom) | ||
Trey | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
