I've had a strange thing happen with my grandparents DD machine. I had to put a new pump in it about a month ago. Before putting the machine back together I filled the tub about halfway full or water and spun it out to make sure there were no leaks (those spring clamps were a pain to get back on). Everything was fine and I put the machine back together. About a week or so later, we ran out first load through it with the new pump, and on the first spin, it leaked a couple of ounces of water, wasn't much but enough that I wondered where it came from. It didn't appear to leak anymore during the second spin. Today was the second load that was run through it and it never leaked at all. I was just wondering if there was some settling that has to occur with the clamps getting seated. Hopefully everything is ok now, but it was just a strange occurance.