Thread Number: 45988
lint filter for a Westinghouse slant front D-6 |
[Down to Last] |
Post# 672310   4/12/2013 at 19:04 (4,030 days old) by classiccaprice (Hampton, Virginia)   |   | |
Checkrate/Likes
 
     
Since I've not had luck looking for a replacement, I was looking for someone who could give me some measurements for a D-6 lint filter. Judging by the backplate, I know the width is 13" and height is 11.5."
The way I figure it, I have two options...
1) My original thought was to modify a 13" by 9" cake pan. This isn't ideal, but might work and would be cheaper.
2) I'm looking into perhaps getting a facsimile replicated at a sheet metal shop. At the very least I need the depth of the filter and the measurements of the metal vs. screened area.
I know RevvinKevin has a similar design on his machine... Hey Kevin!!! CLICK HERE TO GO TO classiccaprice's LINK |
|
Post# 672459 , Reply# 1   4/13/2013 at 13:27 (4,029 days old) by RevvinKevin (Tinseltown - Shakey Town - La-La Land)   |   | |
Checkrate/Likes
 
     
|
Post# 672587 , Reply# 2   4/13/2013 at 19:51 (4,028 days old) by classiccaprice (Hampton, Virginia)   |   | |
Checkrate/Likes
 
     
|
Post# 672619 , Reply# 3   4/13/2013 at 22:51 (4,028 days old) by arbilab (Ft Worth TX (Ridglea))   |   | |
Checkrate/Likes
 
     
|