|
Thread Number: 49216
Anyone seen this before ??? |
[Down to Last] |  |
|
| Post# 712327 , Reply# 1 10/30/2013 at 20:29 (3,829 days old) by danorob1 () | ||
|
And the Washer Crack: 
| ||
Post# 712397 , Reply# 3 10/31/2013 at 07:39 (3,828 days old) by countryguy  (Astorville, ON, Canada) |
||
 | ||
|
Post# 712400 , Reply# 4 10/31/2013 at 08:02 (3,828 days old) by Tomturbomatic (Beltsville, MD) |
||
|
They might have been screwed down too tightly or not in exact alignment. I would ask SQ about it. | ||
|
Post# 712460 , Reply# 5 10/31/2013 at 16:14 (3,828 days old) by imperial70 (MA USA) |
||
|
Now that you mention it. Alignment. I noticed my Speed Queen dryer panel side caps are not aligned properly. hmmmmmm | ||
| Post# 716106 , Reply# 6 11/18/2013 at 18:32 (3,810 days old) by drosefw () | ||
|
Same Problem, Cracked Side Panel My wife recently noticed a crack on the side panel of our new Speed Queen washer. It was flawless when it was delivered. This just happened. 
| ||
| Post# 716109 , Reply# 7 11/18/2013 at 18:36 (3,810 days old) by drosefw () | ||
|
Here is a Picture of the crack. This is a picture of the crack. 
| ||
| Post# 735723 , Reply# 8 2/16/2014 at 20:19 (3,720 days old) by randallius () | ||
|
I HAVE THE SAME EXACT PROBLEM Were you ever able to get this resolved/fixed? I have the same exact problem on my Speed Queen AWN542S and ADG4BRG. The units are less then a year old and they weren't cheap, so this is very frustrating. | ||
|
Post# 735801 , Reply# 9 2/17/2014 at 08:52 (3,719 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK) |
||
Speed Queen....
This can happen with the best of appliances and manufacturers, looks like its a stess point thats just given out with pressure.
Its vital and important that this information is fed back and reported to the manufacturers asap by everyone (under warranty or not) so they have the information and can work to develop a fix etc..... | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
