Thread Number: 49467
Kenmore/Whirlpool DD Spin-Spray |
[Down to Last] |
Post# 715548   11/15/2013 at 13:51 (3,812 days old) by mrb627 (Buford, GA)   |   | |
Checkrate/Likes
 
     
|
|
Post# 715556 , Reply# 1   11/15/2013 at 14:56 (3,812 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
     
|
Post# 715565 , Reply# 2   11/15/2013 at 16:02 (3,812 days old) by mrb627 (Buford, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 715582 , Reply# 3   11/15/2013 at 17:38 (3,812 days old) by pierreandreply4 (St-Bruno de montarville (province of quebec) canada)   |   | |
Checkrate/Likes
 
     
|
Post# 715817 , Reply# 6   11/17/2013 at 06:36 (3,810 days old) by mrb627 (Buford, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 716225 , Reply# 7   11/19/2013 at 07:03 (3,808 days old) by chetlaham (United States)   |   | |
Checkrate/Likes
 
     
I do know as water saving regulations started kicking in spin sprays started to become shorter ie from 20 seconds to 15 then to 10. Also on much latter models the half a tub drain and refill for the press care cycle was substituted for 2 spray rinses at the beginning if the first spin in the permanent press cycle. But to have seen the varied spin sprays on the DD from model to model to model. One thing though I never agreed with was spraying in the final rinse since I would thing that much was some of the softner away. |
Post# 716941 , Reply# 8   11/21/2013 at 20:29 (3,805 days old) by supersurgilator (Indiana)   |   | |
Checkrate/Likes
 
     
My early 1983 Kenmore DD has 3 sprays before the rinse, and 3 in the final spin. |
Post# 716963 , Reply# 9   11/21/2013 at 22:13 (3,805 days old) by arris (Rochester New York)   |   | |
Checkrate/Likes
 
     
|