Thread Number: 50204
need new front panels for a kds18
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 724309   1/1/2014 at 13:00 (3,739 days old) by bmr6969 (columbus ohio)        

Anyone have an extra set of panels they would like to sell??




Post# 724322 , Reply# 1   1/1/2014 at 14:51 (3,739 days old) by firedome (Binghamton NY & Lake Champlain VT)        
possibly...

firedome's profile picture
I may have a white door panel, not sure if I have the lower though... it's in a shed elsewhere, will check when it warms up, it's snowing and a high of 12 tomorrow!

Post# 724331 , Reply# 2   1/1/2014 at 15:36 (3,739 days old) by bmr6969 (columbus ohio)        

Thank you!! any color will do i can take them to the body shop and have them spray them


Post# 724387 , Reply# 3   1/1/2014 at 19:36 (3,739 days old) by stevet (West Melbourne, FL)        
I have a few sets!

I was just up in the attic putting away the Christmas tree and decorations and I can tell you that I have a few Vari-front panel kits that will fit your machine. These have the 4 different colored panels in them and the thin stainless steel trim on the sides.

Is that what you are looking for or do you want only the single wrap around panel. Also do you need the door panel and the lower panel as well. I have both if you want to go the vari-front way.

These panels will fit all machines from the 18 thru the 23 series except the Architect series which had a shorter door panel. The bottom panels are the same on all of them.
Let me know
Steve


Post# 724391 , Reply# 4   1/1/2014 at 19:40 (3,739 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        
Fine

toploader55's profile picture
And you've been holding out on me ???

Post# 724397 , Reply# 5   1/1/2014 at 20:16 (3,739 days old) by stevet (West Melbourne, FL)        
How was I to know..

if you don't tell me what you want???

Post# 724469 , Reply# 6   1/2/2014 at 06:45 (3,739 days old) by bmr6969 (columbus ohio)        
Varifront panels

Stevet varifront panels would be fine.....this is the machine i picked up....got him down to 25.00 seems to be in good working order

Post# 724481 , Reply# 7   1/2/2014 at 08:36 (3,738 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
I was gonna say if their removable panels...why not just buy galvanized sheets, cut to fit, and paint them yourself.....

I made my own stainless ones for my Kenmore for a small cost.....

you could even do thin plexiglas, and either paint the backside and color, or add pictures or designs behind a protected shield...anything is possible....

you can find them at most home centers....and cut to fit.....


I am tempted by the diamond plate.....although would fit the design of a garage more than a kitchen.....but would look cool in a mancave....and to trim the fridge the same way...

another big rage is magnetic sheets of prints for your dishwasher, fridge and washer....they can be changed for the seasons, or what ever pattern to your liking...may be odd....but people will buy anything!


Post# 724496 , Reply# 8   1/2/2014 at 10:21 (3,738 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

This post has been removed by the member who posted it.



Post# 724731 , Reply# 9   1/3/2014 at 12:31 (3,737 days old) by bmr6969 (columbus ohio)        
Paging Stevet.....

Whats the best way to get ahold of you? my email is joseph.wilson1975@gmail.com


Post# 725058 , Reply# 10   1/4/2014 at 16:44 (3,736 days old) by stevet (West Melbourne, FL)        
Call or email!

Joe, just saw your message. I also see you are picking up another 18 in Troy, of all places! I wonder if the seller worked for Hobart at some point!
If you still want the panels, give me a call at 407-506-2280 or at the email listed in my profile.
Thanks
Steve


Post# 725193 , Reply# 11   1/5/2014 at 10:29 (3,735 days old) by bmr6969 (columbus ohio)        
THANKS !!

Sent you an email Steve


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy