Thread Number: 53266
Wanted: Maytag Neptune Motor Control Board |
[Down to Last] |
Post# 756128   5/10/2014 at 16:31 (3,637 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
|
Post# 756138 , Reply# 1   5/10/2014 at 18:23 (3,637 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
Jerry - if something works out with someone here at aw.org, great - otherwise, I checked ebay - and found this : $69 buy it now price...but w/o the part number...this might not be helpful at all.
CLICK HERE TO GO TO ovrphil's LINK on eBay |
Post# 756140 , Reply# 2   5/10/2014 at 18:33 (3,637 days old) by Yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
|
Post# 756142 , Reply# 3   5/10/2014 at 18:36 (3,637 days old) by super32 (Blackstone Massachusetts)   |   | |
Checkrate/Likes
 
     
|
Post# 756144 , Reply# 4   5/10/2014 at 18:48 (3,637 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 756146 , Reply# 5   5/10/2014 at 19:05 (3,637 days old) by Yogitunes (New Jersey)   |   | |
Checkrate/Likes
 
     
Scott's correct...there are several for the 5500 series alone....I should know, different motors as well.....
the only way most were interchangeable was to change the motor and board together, almost as a matched set... although I was always partial to the "revved up" jet sound of the 3000/4000 series motor....a very quiet machine until the final spin, THAT got everyones attention! video courtesy of our own Eddy1210 |
Post# 756147 , Reply# 6   5/10/2014 at 19:11 (3,637 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 756157 , Reply# 7   5/10/2014 at 19:58 (3,637 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|
Post# 756187 , Reply# 8   5/10/2014 at 21:49 (3,637 days old) by repair-man (Pittsburgh PA)   |   | |
Checkrate/Likes
 
2    
The machine control board that is pictured in reply #1 is not a good board. You can see the famous R11 is burnt out. The door won't lock so the machine will not spin. Someone is trying to sell a bad board for $69. |
Post# 756189 , Reply# 9   5/10/2014 at 22:10 (3,637 days old) by redcarpetdrew (Fairfield, CA)   |   | |
Checkrate/Likes
 
     
That board is toast. As a fellow seller, I sent a courtesy message to him as he honestly may not know. Lord knows I've seen a few of those shot R-11's in my time...
That board is from a Neptune Super Stack. He also has a valid board listed that would be a great item for all you MAH4000 owners as long as it's as good as it looks and currently at a very reasonable price... RCD CLICK HERE TO GO TO redcarpetdrew's LINK on eBay |
Post# 756193 , Reply# 10   5/10/2014 at 22:26 (3,637 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|
Post# 756279 , Reply# 11   5/11/2014 at 09:47 (3,636 days old) by redcarpetdrew (Fairfield, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 756289 , Reply# 12   5/11/2014 at 10:41 (3,636 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|