Thread Number: 57687  /  Tag: Modern Automatic Washers
Maytag Bravos Washer Problem 		[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 800995   12/26/2014 at 18:47 (3,401 days old) by gewasher1980 ()        

Hello all i have a question about my Maytag Bravo Washer the model number is MVWX600BW i've had for 7 months now and it's a good machine so far until it started acting up a few day's ago i ran a normal load like alway's and chose the normal cycle and it started spinning to sense the load and then it stopped and started fillng all the way up with water,because normally it will spin to sense the load and then start filling with water and spinning to wet the clothes then it stops and washes like it does.So after it went through the cycle and what then i decided to run another cycle with no clothes on the normal cycle and it worked fine,so i don't know what is wrong with the cursed thing.




Post# 800997 , Reply# 1   12/26/2014 at 19:20 (3,401 days old) by Yogitunes (New Jersey)        

yogitunes's profile picture
sounds like it was somehow set or triggered to the bulky cycle which would add a full tub of water.....

if anything, try unplugging it for a while and then try again, this will sometimes reset everything......

if anything, at 7 months, it should still be under warranty


let us know how you make out

Post# 801000 , Reply# 2   12/26/2014 at 20:02 (3,401 days old) by gewasher1980 ()        

I did unplugged it to reset it the other day,it seemed to work ok but earlier today i did a a few loads it seemed fine but the last load it didn't dispensed the softener so i don't know what's up with it.....lol but i'll have it checked out by a repair man because i don't know anything about today's machines.

Post# 801001 , Reply# 3   12/26/2014 at 20:05 (3,401 days old) by gewasher1980 ()        

Also i forgot to mentioned when it was filling all the way up on normal cycle,so i drained it and tried another cycle like the wrinkle control and it still did the same so i let it complete the cycle and when it was finished i ran the machine again and it worked fine till today it started acting up when it didn't dispense the softener for the last load.

Post# 801003 , Reply# 4   12/26/2014 at 20:13 (3,401 days old) by Pulsator (Saint Joseph, MI)        
This is my personal opinion.

 pulsator's profile picture
Hmmmm... I'd have to talk to some of the engineers at work but that sounds like a water valve issue... I'll ask when I'm back in the office.

Post# 801004 , Reply# 5   12/26/2014 at 20:23 (3,401 days old) by gewasher1980 ()        

Thanks pulsator,could be that or the control board,but like i said it worked fine today and until the last load it didn't dispense the softener so,who know's.....lol


Forum Index:       Other Forums:                      


Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy