Thread Number: 58776
/ Tag: Modern Automatic Washers
Hotpoint WMFUG942 Smart 9kg |
[Down to Last] |
|
Post# 813601 , Reply# 1   3/12/2015 at 13:27 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Under the machine motor etc |
Post# 813602 , Reply# 2   3/12/2015 at 13:30 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Nifec motor |
Post# 813604 , Reply# 3   3/12/2015 at 13:33 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Back panel. I noticed the thin outlet pipe compared to machines I've seen in the 90s or the Zanussi Jetsystem. Those brackets in the hotpoint are sooo difficult to remove as need small spanner. |
Post# 813605 , Reply# 4   3/12/2015 at 13:36 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Love the detergent dispenser |
Post# 813607 , Reply# 5   3/12/2015 at 13:39 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Pretty deep rinse level. Here the machine added around 20 mins to the rinse cycle but only completed 2 rinses. It added quite a bit of water and the rinse cycles lasted for sometime. I'm sure it did a great job. |
Post# 813611 , Reply# 6   3/12/2015 at 13:43 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
First rinse Cotton 40 cycle video. Fully loaded 9kg drum. CLICK HERE TO GO TO aeg03's LINK |
Post# 813613 , Reply# 7   3/12/2015 at 13:45 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
2nd and final fabric conditioner rinse CLICK HERE TO GO TO aeg03's LINK |
Post# 813616 , Reply# 8   3/12/2015 at 13:52 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Heavy load with towels and jeans - machine trying to balance the wash. CLICK HERE TO GO TO aeg03's LINK |
Post# 813621 , Reply# 9   3/12/2015 at 13:55 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Start of wash. Sensing stage. This was on Cottons 20 programme. The 'Egg Timer' was flashing and slow saturation tumbles. CLICK HERE TO GO TO aeg03's LINK |
Post# 813623 , Reply# 10   3/12/2015 at 13:58 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Very start of the cycle. I know it's not in any order. Typical Indesit-Hotpoint refills. CLICK HERE TO GO TO aeg03's LINK |
Post# 813625 , Reply# 11   3/12/2015 at 14:02 (3,329 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Final video showing the dual speed drum rotation on the Standard Cottons Programme. It has different speeds and alternates the drum movements. But I didn't have time to film properly. CLICK HERE TO GO TO aeg03's LINK |
Post# 813655 , Reply# 13   3/12/2015 at 16:16 (3,329 days old) by BoschExxcel ()   |   | |
Checkrate/Likes
 
     
Not a bad machine! I never have powder left in my Whirlpool or Bosch. |
Post# 813809 , Reply# 15   3/13/2015 at 14:27 (3,328 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Just to show you how the detergent dispenser looks like now it's been used 5 times. Spotless with the tap turned on correctly. Still think it's a strange design but I like different. |
Post# 813811 , Reply# 16   3/13/2015 at 14:29 (3,328 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
That's all my pics posted of my new machine. Love the large drum. Thanks for viewing. |
Post# 813814 , Reply# 17   3/13/2015 at 14:32 (3,328 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Only just managed to film the spin. CLICK HERE TO GO TO aeg03's LINK |
Post# 813985 , Reply# 18   3/14/2015 at 20:08 (3,327 days old) by Haxisfan (Europe - UK / Italy)   |   | |
Checkrate/Likes
 
     
Hi aeg03, I see you got a new machine in the end... I'm a bit surprised to see that you finally decided to go for an Indesit company machine considering your past experience with them... oh well... everybody deserves a second chance ;-)
In my case, I've already given them a second chance some time ago, and all I got was disappointment! That said, they might really be different nowadays and I find their look and wash functions rather appealing (truth be told, I had a soft spot for the Hotpoint look even with the previous models, but I never fully appreciated the extent of their programming). Good luck with this babe ;-) |
Post# 816118 , Reply# 21   3/27/2015 at 17:43 (3,314 days old) by aeg03 (London, UK)   |   | |
Checkrate/Likes
 
     
Vid CLICK HERE TO GO TO aeg03's LINK |
Post# 816386 , Reply# 22   3/29/2015 at 06:21 (3,313 days old) by iej (.... )   |   | |
Checkrate/Likes
 
     
A relative of mine got the washer dryer version of this family of machines. It's working surprisingly well. The dry cycles are excellent. |