Thread Number: 6186
Maytag A207S question |
[Down to Last] |
|
Post# 126397 , Reply# 1   5/3/2006 at 23:44 (6,564 days old) by tipanringer ()   |   | |
Checkrate/Likes
 
     
I'm sort of new at this but if it's anything like mine....then it's a lint filter that sets in there...and I am not sure where to get one....sorry. Tim |
Post# 126398 , Reply# 2   5/3/2006 at 23:44 (6,564 days old) by sudsmaster (SF Bay Area, California)   |   | |
Checkrate/Likes
 
     
|
Post# 126399 , Reply# 3   5/4/2006 at 00:01 (6,564 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
that looks like a standard capacity machine (small, medium, large( rather than those 3 + extra large buttons. It's missing part of the fabric dispenser cup assembly. What you're looking at is the "chamber" in which the centrifuged softener drains down through when 1st spin stops. What you need is the "cradle" looking thing which allows the fabric softener cup to sit in--the top two piecs which Rich showed in his picture.
|
Post# 126407 , Reply# 4   5/4/2006 at 00:46 (6,564 days old) by dadoes (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
     
Yeah, the lint filter is probably there (can't tell for sure unless the whole thing is pulled out of the agitator), but the top part of it is partly missing. An entire filter assembly and a softener cup could be ordered from www.repairclinic.com... but just the top part of it would only be available by pulling/breaking it off another filter.
|
Post# 126408 , Reply# 5   5/4/2006 at 00:48 (6,564 days old) by gansky1 (Omaha, The Home of the TV Dinner!)   |   | |
Checkrate/Likes
 
     
That filter/dispenser and cup are still available from Maytag, any local appliance parts dealer can get them for you. It looks like you have iron stains on the tub and agitator, Super Iron Out available at most Targets, WalMart, etc., works very well at removing these, just follow instructions on the bottle.
|