Thread Number: 63386  /  Tag: Classified Ad Finds
KDR-67 KitchenAid Regency being parted out.
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 859663   1/2/2016 at 18:23 (3,008 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture

The Regency's Sump has bit the dust.

 

So, if anyone is needing parts for a 16 Series machine, let me know. Everything is in Beautiful condition except the Wash Chamber.

 

I am keeping the Unicouple, Cabinet and the top for a project.

 

Racks are Pristine Pump and Motor are Great.

 

Let me know if ya need something.





Post# 859669 , Reply# 1   1/2/2016 at 19:08 (3,008 days old) by appnut (TX)        

appnut's profile picture

If it were a 16 series wouldn't it be KDR66? 


Post# 859671 , Reply# 2   1/2/2016 at 19:20 (3,008 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture

I don't know Bob... I just figured if the first number was a 6... I thought it was a 16.


Post# 859791 , Reply# 3   1/3/2016 at 11:59 (3,007 days old) by firedome (Binghamton NY & Lake Champlain VT)        
It's a 17 series...

firedome's profile picture
we had one.

Post# 861175 , Reply# 4   1/11/2016 at 07:24 (2,999 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        
Last Call !!!

toploader55's profile picture

If any one needs anything from this machine...

 

Please let me know because at the end of this week it will meet it demise.


Post# 861226 , Reply# 5   1/11/2016 at 14:44 (2,999 days old) by nmassman44 (Brooksville Florida)        

nmassman44's profile picture
Racks! Will they fit into a KDS 17?

Post# 861312 , Reply# 6   1/12/2016 at 00:30 (2,998 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture
Hi Mike.

Here are pics of the racks. I can't imagine why they would not. I actually like the Top rack better than the traditional KA Rack. This top rack is what they used to put in the Custom Series. (BOL)

I have found you can get more in this rack and it tilts.


  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 861400 , Reply# 7   1/12/2016 at 12:16 (2,998 days old) by nmassman44 (Brooksville Florida)        

nmassman44's profile picture
The dishwasher that I am looking for racks for is a 17A. The top rack side rails are all split and rusted, and the rack has the fold down tines, but this rack should work and it shouldn't be an issue without the fold down tines.

Post# 861453 , Reply# 8   1/12/2016 at 16:00 (2,998 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture

Mike, Let me know if you want them. I'll bring them to Jon's in Melrose next week.

 

Need a HydroSweep ??? I have like 6 of them and filters too.  I also have the Wash Arm Support , Detergent Dispensors, Drain Valve Door Gaskets etc.

 

I hate to throw them away.


Post# 861469 , Reply# 9   1/12/2016 at 17:33 (2,998 days old) by appnut (TX)        

appnut's profile picture

Eddie, hell don't get rid of the wash arm support.  Someone's going to need it. 


Post# 861496 , Reply# 10   1/12/2016 at 20:30 (2,998 days old) by nmassman44 (Brooksville Florida)        

nmassman44's profile picture
Yes Eddie, I want them!

Post# 861498 , Reply# 11   1/12/2016 at 20:32 (2,998 days old) by nmassman44 (Brooksville Florida)        

nmassman44's profile picture
Racks I mean...I already replaced the arm and wash arm support so I don't need em. The racks will be going right up the street from Jon to Stoneham.

Post# 861509 , Reply# 12   1/12/2016 at 21:13 (2,998 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture
Don't worry Bob. I know how rare and needed that part is. Actually most parts for any vintage machine.

OK Mike. You're on the list for the tear down on that machine which will probably happen Friday. I'll keep you posted through your e-mail on the ETA.



Post# 861511 , Reply# 13   1/12/2016 at 21:27 (2,998 days old) by nmassman44 (Brooksville Florida)        

nmassman44's profile picture
Very good! Thank you!!

Post# 862416 , Reply# 14   1/17/2016 at 19:27 (2,993 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture
Ummmmmm....

Just thinking about this...

If the Regency is supposed to be a 17 series machine... I am sripping parts off of it tonight.

And the Motor is a KD 16. So just to clarify, wouldn't that make this machine a 16 series ???


Post# 862417 , Reply# 15   1/17/2016 at 19:30 (2,993 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture
Other pic of Spec Plate

Post# 862424 , Reply# 16   1/17/2016 at 19:48 (2,993 days old) by beekeyknee (Columbia, MO)        

beekeyknee's profile picture
Sometimes the motors for one series will cross over into another series machine. For instance, most KD-20 machines will have an 18 series motor in them. They kept using the same motor until an actual need to change the series happened, I think.


Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy