Thread Number: 66583  /  Tag: Vintage Automatic Washers
Does Anyone Know this Guy? 		[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 892385   8/3/2016 at 12:37 (2,815 days old) by MrMom (LA Calif)        

Hello all
I ran across a thread # 4533 The guy that started it was Totalnewb his name was Steve
If you look at the thread he reproduced the dial for a A606 with permanent Press in Adobe Photo Shop I saw his handle is no longer highlighted so I could not send him an email He offered anyone a copy if they wanted it. Did anyone take him on it. Does anyone have one they could send me or how to get in touch with the guy I added a picture of his dial he made
Thank you for your reply's
Fred

  View Full Size



Post# 892387 , Reply# 1   8/3/2016 at 12:42 (2,815 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture

You know - I remember this thread and I *might* have the PDF file that the OP created.  I'll dig around tonight to see if I can find it.

 

Ben

 

www.automaticwasher.org/cgi-bin/T...
Post# 892512 , Reply# 2   8/4/2016 at 12:48 (2,814 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture

Ok - here's a jpg version of the original PDF, for the archives.
Post# 895148 , Reply# 3   8/22/2016 at 21:04 (2,796 days old) by MrMom (LA Calif)        

Hello
I figured I asked for this so I would post a picture of my knob. I used the above picture. I used a blank UPS shipping label from work. They come two to a sheet 8 1/2 X 11 so it goes right thru your color printer. There a litho paper so it does have to be sealed. I just cut it in a circle about 1/8" larger then the inner circle I cut just inside the line, Then cut from inner circle to the outside right along the off. Then I peeled off the liner, I started at the opposite side, When it came around to the slit it over lapped so I used an exacto knife and trimmed it to fit right next to the off, Once it was down firm I used the blade around the outside like trimming a pie crust. I took my finger nail and followed around the inner chrome to leave a dent then took the exacto knife to slit the center out. The paper is real absorbent so I misted it two times with clear so the ink would not run. Once that was dry I hit it 6 coats just to make sure. So far it has been on for over three weeks and Spray and Wash hasn't hurt it.

  View Full Size
Post# 895241 , Reply# 4   8/23/2016 at 09:08 (2,795 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture

Fred - looks great!

Forum Index:       Other Forums:                      


Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy