|
Thread Number: 6687
'52 Kenmore |
[Down to Last] |  |
|
Post# 134176 , Reply# 1 6/7/2006 at 20:44 (6,529 days old) by gansky1  (Omaha, The Home of the TV Dinner!) |
||
 | ||
| Post# 134179 , Reply# 2 6/7/2006 at 20:48 (6,529 days old) by gregm () | ||
|
thanks Greg thank you Greg !!!!! | ||
| Post# 134183 , Reply# 3 6/7/2006 at 21:11 (6,529 days old) by gregm () | ||
|
washaaa video as they say in boston, washaaa video should work ..... CLICK HERE TO GO TO gregm's LINK | ||
| Post# 134186 , Reply# 4 6/7/2006 at 21:26 (6,529 days old) by rickr (.) | ||
 | ||
| Post# 134187 , Reply# 5 6/7/2006 at 21:29 (6,529 days old) by jasonl (Cookeville, TN) | ||
|
I'd get it but they'd chahhge me too much for shippin. Too faahh ta drive in the cah. | ||
| Post# 134190 , Reply# 6 6/7/2006 at 21:34 (6,529 days old) by gregm () | ||
|
to funny (laughing my a** off), you guys are to funny .........time for a haaavey wallbangaaa | ||
|
Post# 134239 , Reply# 7 6/7/2006 at 23:08 (6,529 days old) by appnut (TX) |
||
 | ||
| Post# 134240 , Reply# 8 6/7/2006 at 23:20 (6,529 days old) by gregm () | ||
|
yes bob actually the Kenmore "turnsover" quite well, but in this case, I had two, large, heavy rugs in the machine so they weren't really moving much | ||
|
Post# 134245 , Reply# 9 6/7/2006 at 23:34 (6,529 days old) by appnut (TX) |
||
|
| ||
| Post# 134292 , Reply# 10 6/8/2006 at 07:30 (6,528 days old) by westyslantfront () | ||
|
Hi Greg. A beautiful set. Roger and Nate over last night to do laundry and we looked at listing on Ebay. I sure hope it will find a nice new home. Ross | ||
| Post# 134293 , Reply# 11 6/8/2006 at 07:32 (6,528 days old) by dick_s. () | ||
|
Greg-I could watch that video for hours! The 52 Kenmore is one of my dream machines! Thanks for postin' it. Dick | ||
| Post# 134304 , Reply# 12 6/8/2006 at 08:31 (6,528 days old) by gregm () | ||
|
ebay link to Kenmores CLICK HERE TO GO TO gregm's LINK on eBay | ||
| Post# 134434 , Reply# 13 6/8/2006 at 15:26 (6,528 days old) by gregm () | ||
|
better this vid is just for you bob (appnut), what do you mean no turnover ? (big grin) CLICK HERE TO GO TO gregm's LINK | ||
| Post# 134435 , Reply# 14 6/8/2006 at 15:36 (6,528 days old) by drmitch () | ||
|
Love em! | ||
| Post# 134441 , Reply# 15 6/8/2006 at 16:01 (6,528 days old) by gregm () | ||
|
spray rinse just a quick spin/spray rinse vid CLICK HERE TO GO TO gregm's LINK | ||
| Post# 134444 , Reply# 16 6/8/2006 at 16:24 (6,528 days old) by jasonl (Cookeville, TN) | ||
|
Stick a Rotoswirl in there and see what happens | ||
| Post# 134445 , Reply# 17 6/8/2006 at 16:27 (6,528 days old) by gregm () | ||
|
rotoswirl ? turnover even more ? they are "thinner" right ? is that why ? | ||
| Post# 134453 , Reply# 18 6/8/2006 at 17:38 (6,528 days old) by brettsomers () | ||
|
doesnt that machine HAVE a roto-swirl? looks like on the eBay pics. | ||
| Post# 134454 , Reply# 19 6/8/2006 at 17:47 (6,528 days old) by gregm () | ||
|
no it has the "older/bigger/fatter" pregnant swirl | ||
| Post# 134459 , Reply# 20 6/8/2006 at 18:29 (6,528 days old) by jasonl (Cookeville, TN) | ||
|
doh Yep, it is a rotoswirl, my bad. | ||
|
Post# 134486 , Reply# 21 6/8/2006 at 20:01 (6,528 days old) by appnut (TX) |
||
|
| ||
| Post# 134564 , Reply# 22 6/8/2006 at 23:45 (6,528 days old) by agiflow () | ||
|
I think for the size of the load....this older roto swirl seems very "action packed"..these were very impressive agitators for their time. I actually like this agitators action over the norge...to each his own. | ||
|
Post# 134566 , Reply# 23 6/8/2006 at 23:59 (6,528 days old) by tolivac (greenville nc) |
||
|
Wow! Reminds me of the KN washer my grandmother had.Loved watching it as a little kid.Loved the "suck down" and "push back up" action. | ||
| Post# 134676 , Reply# 25 6/9/2006 at 13:30 (6,527 days old) by lesto (Atlanta) | ||
|
I also didn't think Kenmore introduced the rotoswirl until around 1955. | ||
| Post# 134682 , Reply# 26 6/9/2006 at 14:08 (6,527 days old) by gregm () | ||
|
Hi Les thanks Les, but as I stated in the listing, if buyer makes ALL necessary provisions/arrangements, I will leave outside on day of pickup. So if you want them, you just have to set it up :) have a nice weekend | ||
| Post# 134695 , Reply# 28 6/9/2006 at 14:53 (6,527 days old) by mixfinder () | ||
|
Roll Over You have a lot of faith, to overload and old beauty like that. The rugs were over the top and even the load you demoed later with the mixed colors was what I would call a bit too much. Guess the washers are tougher than I gave them credit for. Kelly | ||
| Post# 134697 , Reply# 29 6/9/2006 at 15:44 (6,527 days old) by mickeyd (Hamburg NY) | ||
missing out | ||
| Post# 134703 , Reply# 30 6/9/2006 at 16:01 (6,527 days old) by gregm () | ||
|
hey mike Mike, I have no clue as to why its not working, do you have "dial-up" ? that is the only thing I can think of is that your connection could be to slow ? let me know ......... | ||
| Post# 134708 , Reply# 31 6/9/2006 at 17:10 (6,527 days old) by gregm () | ||
|
year '53 I think the washer is a 1953 whereas the first two # 's after the 110. are "53" | ||
| Post# 134711 , Reply# 32 6/9/2006 at 17:55 (6,527 days old) by mickeyd (Hamburg NY) | ||
|
Thanks, Greg | ||
| Post# 134743 , Reply# 33 6/9/2006 at 21:38 (6,527 days old) by mayken4now (Panama City, Florida) | ||
lesto, as requested before, why not post a pic of your machine dahl'in? Then it would be fair to compare years, doubts, exceptions of opinion my dear, as the court would decide, without proof of/or evidence, then the burden rest in your case. Would love to see your collection, as the Atlanta area has a WONDERFUL Frog Eye Kenmo, it resides in a part of East Point. mayken4now | ||
| Post# 134761 , Reply# 34 6/10/2006 at 02:44 (6,527 days old) by brettsomers () | ||
|
Kelly, if you think the colored load was overloaded, you should watch the last of Roberts Easy Automatic videos! i remember Toggleswitch also posted some vids with a truly overloaded GE. | ||
| Post# 134820 , Reply# 35 6/10/2006 at 09:36 (6,526 days old) by gregm () | ||
|
mikeyd Mike, I would just left click once on my link, that should work, I don't think right clicking and trying to download works with this. Again, I think you just left click once and it should bring you immediately to the video and start playing it automatically. | ||
|
Post# 134895 , Reply# 37 6/10/2006 at 17:10 (6,526 days old) by dadoes (TX, U.S. of A.) |
||
YouTube doesn't allow right-click and saving the file, no way to do that that I've found thus far. It temporarily spools the file to the browser cache, then the file auto-deletes when the page is closed. I've tried saving the cached file, doesn't work. Anyway, I'm on a dial-up, and it does work, just takes long. If the playback is paused, the file will continue downloading/spooling, and will play smoothly when downloading is complete. As long as the page isn't closed, the clip can be replayed without having to be re-downloaded. I've found that a download accelerator I have causes the clips to be cut short even though the download apparently has finished. If I disable the accelerator so the download can run at "normal" speed, it plays correctly. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
