Thread Number: 6692
First Washer Unloaded............
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 134194   6/7/2006 at 21:54 (6,531 days old) by filterflo (Chicago Area)        

My trip to DC yielded this 1964 Frigidaire WCD-64 washer from John's friend Robert. It was in very rough shape, quite rusty, broken cabinet frame, but was certainly worth hauling home as a parts donor...........




Post# 134196 , Reply# 1   6/7/2006 at 21:57 (6,531 days old) by filterflo (Chicago Area)        

closer look at the Frigidaire control panel. The timer was broken but I did get it to power up for a few minutes to check the transmission, pump, etc. This washer is actually one of the last multi-matic transmissions with two belts, pulleys, slide gear clutch, etc. The tranny was functional but really needs a rebuild.....the pump surprisingly was leak free and OK and the spin bearings were nice and quiet......

Post# 134197 , Reply# 2   6/7/2006 at 22:00 (6,531 days old) by filterflo (Chicago Area)        

All in all, this washer makes a better parts donor than an actual working washer. Even with a lot of work it would not be a very nice washer, it was just too rough. By parting it out and saving all the critical parts, it will help many many other washers be saved for future restoration......here is the tub, which is in very good condition.........

Post# 134199 , Reply# 3   6/7/2006 at 22:02 (6,531 days old) by filterflo (Chicago Area)        

Jetcone and pulsator. These are NOT the original to this washer, but replacements. This washer would have had an older style pulsator.........These parts here are in pretty good shape and acutally came out very easily........

Post# 134202 , Reply# 4   6/7/2006 at 22:04 (6,531 days old) by filterflo (Chicago Area)        

Multi-Matic transmission. Wonderful and facinating design, this one will make a good rebuildable unit and has a good intact pump on it too..........along with those pesky belts which are often hard to adjust........

Post# 134205 , Reply# 5   6/7/2006 at 22:06 (6,531 days old) by filterflo (Chicago Area)        

This is the empty case after removing the mechanism. The outer tub had a hole rusted thru it at the top of the support tower, and was quite rusty at the top.

Post# 134207 , Reply# 6   6/7/2006 at 22:08 (6,531 days old) by filterflo (Chicago Area)        

Washer top. I will save some of the parts from this, but not all. Most are in pretty bad shape. The timer and knobs will be saved, unfortunately the lid hinge was sprung and very chipped in spots..........

Post# 134210 , Reply# 7   6/7/2006 at 22:10 (6,531 days old) by filterflo (Chicago Area)        

Good yield of usable parts.......bellows, rings, clips, hoses, etc. Invaluable when you need just the right part to restore a washer..........As Ive mentioned before, parting out just one washer can keep many more working for years!

Post# 134211 , Reply# 8   6/7/2006 at 22:12 (6,531 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture
Jimmy - Amen to those belts! Cory and I had a hell of a time on his idential WCD-64. Somehow, after many fits, he was able to get them perfect by chance! Thanks for saving these parts - they will come in handy for you in the coming days.

Ben


Post# 134272 , Reply# 9   6/8/2006 at 03:45 (6,531 days old) by gansky1 (Omaha, The Home of the TV Dinner!)        

gansky1's profile picture
It looks like there were some good parts from that machine.

After my three week nightmare with my '59 multimatic, a different motor mount and it's even harder to adjust those belts, I'm convinced that the best way to get the machine to run perfectly is install a rollermatic mechanism!


Post# 134281 , Reply# 10   6/8/2006 at 06:02 (6,531 days old) by christfr (st louis mo)        
WOW

christfr's profile picture
AWESOME! WILL BE FANTASTIC WHEN YOU DONE...CONGRATS

Post# 134288 , Reply# 11   6/8/2006 at 07:19 (6,531 days old) by swestoyz (Cedar Falls, IA)        

swestoyz's profile picture
Greg - maybe you just didn't have the 'magic' touch! LOL I agree with your solution, and more fun in the end as well! Unimatics for everyone!

Post# 134407 , Reply# 12   6/8/2006 at 13:31 (6,531 days old) by toggleswitch (New York City, NY)        

toggleswitch's profile picture
oh child.

DO put a rag under those tools that are on top of the SQ dryer.

I'm still clutching the pearls in horror. *LOL*

OCD anyone?


Post# 134437 , Reply# 13   6/8/2006 at 15:46 (6,530 days old) by filterflo (Chicago Area)        

Speed Queen vs Rough Trade. I MUST learn to be more respectful with my tool around a Queen.....

Post# 134473 , Reply# 14   6/8/2006 at 19:36 (6,530 days old) by frontaloadotmy (the cool gay realm)        
FF

Funny, Hilarious; I'm fallin' apart!!

Post# 134696 , Reply# 15   6/9/2006 at 15:16 (6,529 days old) by trainguy (Key West, FL)        
Now That The First Washer Is Unloaded.......

trainguy's profile picture
What's behind machine #1?

Post# 134764 , Reply# 16   6/10/2006 at 03:30 (6,529 days old) by filterflo (Chicago Area)        

Van is almost unloaded.........pics of the other sets coming soon! Need to clean them up a bit first....The other item I brought back from John L's place was this: a fabulous 1955 GE Wall Refrigerator...........

Post# 134765 , Reply# 17   6/10/2006 at 03:34 (6,529 days old) by filterflo (Chicago Area)        

GE made this refrigerator, model LW11, from 1955 thru 1960. It hung on a wall, could be built in, used as a room divider, at any level or height that the home owner preferred. It was a fabulous design, but unfortunately was not the best engineered refrigeration system/compressor. Most that are still working have been worked on, usually more than once. This is a working unit that has had the compressor replaced at least once. Cleaned up and restored this is going to a wonderful item, I just LOVE it!

Post# 134766 , Reply# 18   6/10/2006 at 03:34 (6,529 days old) by filterflo (Chicago Area)        

Front view.........

Post# 134767 , Reply# 19   6/10/2006 at 03:35 (6,529 days old) by filterflo (Chicago Area)        

It has 3 opening doors. The two doors on the left are the refrigerator section, and the right hand door is the freezer section.

Post# 134768 , Reply# 20   6/10/2006 at 03:36 (6,529 days old) by filterflo (Chicago Area)        

The 1955 models had a pink interior. It was changed to a white interior in 1956 thru 1960.

Post# 134769 , Reply# 21   6/10/2006 at 03:37 (6,529 days old) by filterflo (Chicago Area)        

Freezer section.........

Post# 134770 , Reply# 22   6/10/2006 at 03:38 (6,529 days old) by filterflo (Chicago Area)        

Another view of the front............

Post# 134807 , Reply# 23   6/10/2006 at 07:28 (6,529 days old) by trainguy (Key West, FL)        
Congrats !

trainguy's profile picture
Jimmy, that's just beautiful!

Post# 134811 , Reply# 24   6/10/2006 at 08:11 (6,529 days old) by paulg (My sweet home... Chicago)        
I still want one of those.

paulg's profile picture
The design concept of those wall-refrigerators is just sooo good. I still could use one now. The whole idea of the wall-refrigerator just seemed to blow right past the population. If I ever find one nearby I'm picking it up. Congrat. Tell us about the sealed-system - or are you just gonna rebuild it?

Post# 134931 , Reply# 25   6/10/2006 at 20:58 (6,528 days old) by veg-o-matic (Baltimore, Hon!)        

veg-o-matic's profile picture
Oooh, that makes me all shivery! Can't wait 'til you get it up (literally) and running! How on earth would you use it as a room divider?

Jimmy, that black car isn't a Packard, is it? You collect cars, too?

veg


Post# 134937 , Reply# 26   6/10/2006 at 21:30 (6,528 days old) by filterflo (Chicago Area)        

Yes, I collect cars along with A LOT of other things! The black car is a rare 1955 Packard with factory installed 1956 trim. Made late in the model year for a special order.....its kind of rough but still a fabulous car, with Torsion Level Ride. The other car in the background is my 1966 Imperial Crown Coupe......

Yes, Veg I agree, the wall refrigerator is fabulous! This shows one of the room divider suggestions from the GE manual......


Post# 134938 , Reply# 27   6/10/2006 at 21:31 (6,528 days old) by filterflo (Chicago Area)        

Another room divider installation. Can you imagine how strong the supports would have to be to hold this thing up?

Post# 134939 , Reply# 28   6/10/2006 at 21:32 (6,528 days old) by filterflo (Chicago Area)        

This shows the built in look. I LOVE this look, but it takes a very special house to have this installed flush in the wall.......

Post# 134941 , Reply# 29   6/10/2006 at 21:34 (6,528 days old) by appnut (TX)        

appnut's profile picture
Jimmy, it's beautiful. Congratulations. Umm, is that a sunny yellor or a pastel green on the outside?

Post# 134942 , Reply# 30   6/10/2006 at 21:35 (6,528 days old) by filterflo (Chicago Area)        

Normal wall installation shown here. Im going to use this in my garage workshop, replacing an earlier one that I had installed when I moved here to my new house. It was kind of rough and quit working last year due to a freon leak. My favorite all time refrigerator! Thank you John L for trading this to me........

Post# 134945 , Reply# 31   6/10/2006 at 21:44 (6,528 days old) by filterflo (Chicago Area)        

Hi Bob, GE called it Canary Yellow. Since it hangs on a wall, I call it "high yellow". Just a joke!...........

Post# 134946 , Reply# 32   6/10/2006 at 21:45 (6,528 days old) by filterflo (Chicago Area)        

GE Mix Or Match color choices.........

Post# 134953 , Reply# 33   6/10/2006 at 22:03 (6,528 days old) by appnut (TX)        

appnut's profile picture
Thank you sir!! and I love the joke!!

Post# 134963 , Reply# 34   6/10/2006 at 22:27 (6,528 days old) by brent-aucoin ()        

Jimmy,
Congrats on another GE wall fridge.
I think that they are so well ahead of their time. Can't get over that no other company has copied this.
Sorry to hear about your GE Wall Fridge that you had when I was out there. Hopefully it will be an easy fix to get her going again.
I can't tell you how many times I opened her doors, just enjoying the manner of it all!
Just curious. Do you think you would ever install one in your kitchen? I bet it would look so great with your appliances you have installed already.
Glad you found this unit! It looks great!
Thanks for sharing.
Brent


Post# 134985 , Reply# 35   6/11/2006 at 02:45 (6,528 days old) by thirtyater ()        
Roll out freezers

Just wanted to add that in the picture of the aqua wall unit it is mounted over two roll out freezers. Those were WAY ahead of their time. Does anyone have one of these in their collection? I would really like to see some good pics if you do!

Post# 134986 , Reply# 36   6/11/2006 at 02:50 (6,528 days old) by filterflo (Chicago Area)        

Hi Brent,
This GE Wall Refrigerator is much better looking than the one I had on the wall when you were here......I would love to have one in my house kitchen and have thought long and hard about how to make one fit in my house, alas it would be a major kitchen redesign to get one in and up on the wall. Would have to remove quite a few kitchen cabinets, perhaps someday if I move to a new place again......I would definately take the wall refrigerator along with me......



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy