Thread Number: 67045  /  Tag: Vintage Automatic Washers
Had To Order New Motor Brushes for the Creda
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 897528   9/6/2016 at 19:42 (2,760 days old) by Tomturbomatic (Beltsville, MD)        

The part number changed 10 years ago so this set has lasted pretty well.  Dealer in AZ says he is not importing anymore because the shipping has gone up so high that the cost of a set of brushes without shipping to customers would be over $80.00. He has 14 sets in stock and that will be it so I ordered two sets at a cost, with shipping, of $155.20. That stock should outlast me. The man said the machine is being treated gently to still be going and looking good and should keep going for a long time. I guess one load of peppermint press shirts a week is gentle use.





Post# 897548 , Reply# 1   9/6/2016 at 22:01 (2,760 days old) by ilovewindex (Tualitan OR)        

ilovewindex's profile picture
LOL

Peppermint Press Shirts... LOL

I've never even seen anything Creda except a cooktop


Post# 897580 , Reply# 2   9/7/2016 at 06:37 (2,760 days old) by Launderess (Quiet Please, There´s a Lady on Stage)        

launderess's profile picture
Creda laundry appliances were introduced/sold in the USA about the same time Miele and Asko began doing the same. Am guessing around late 1980's or so, am sure someone will have the right answer.

Some persons swore by the machines, others at them. Either way Asko and Miele stuck with the American market while Creda didn't.


Post# 897584 , Reply# 3   9/7/2016 at 07:02 (2,760 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)        

foraloysius's profile picture
Actually the Creda brand doesn't really exist anymore.

www.creda.co.uk...

Sometimes you still see a spindryer or so (for instance on Amazon)



Post# 897587 , Reply# 4   9/7/2016 at 07:23 (2,760 days old) by chestermikeuk (Rainhill *Home of the RailwayTrials* Merseyside,UK)        
Creda

chestermikeuk's profile picture
Good to here the old girl is soldering on Tom, a great design and workhorse of the UK laundry market, indeed Creda where the backbone of our laundry era as they launched the first spin dryer, The Creda Debonair and the first British reversing dryer, The Creda Reversomat...

Are the brushes like these Tom in the link?


CLICK HERE TO GO TO chestermikeuk's LINK


Post# 897594 , Reply# 5   9/7/2016 at 08:12 (2,760 days old) by jeff_adelphi (Adelphi, Maryland, USA)        
Yes Mike,

jeff_adelphi's profile picture
Those are the brushes in Tom's Creda. I helped him check out the washer yesterday.

Post# 897596 , Reply# 6   9/7/2016 at 09:10 (2,759 days old) by Tomturbomatic (Beltsville, MD)        

According to the very helpful parts man in Arizona, respecting the load weight and using low sudsing detergent are two key factors to keeping these machines working; possibly affecting the life of the tub bearing. Mine is not abused in that way. I like the way the regular cycle, the only one I use, goes from the wash drain into the first of 4 deep rinses. The design of the intermediate spins between the rinses make great sense. It is pretty amazing how such a lightly built machine, compared to a Miele, can be so durable.

I think he said that they were not sold in the US after 1999 or 2000. He said he still had a good stash of parts so to be sure to check with him before getting rid of her if she suffers a failure.

One thing that is amazing is that for years now it only fills with hot water for the wash, no matter the setting which is not a problem, but with the temperature dial set at 115F and the hot fill of 140F, the machine still has to do a bit of heating to get the water up to 115F and that is with a non-metal outer tub so a lot of heat is lost heating up the stainless steel inner basket with the small amount of water this machine uses.


Post# 897848 , Reply# 7   9/9/2016 at 04:39 (2,758 days old) by thelaundrylab (Hampshire UK)        
1150 Creda Supaspeed...

thelaundrylab's profile picture
Great to hear the Creda is going strong Tom, and hope it lasts in years to come. Curious to know model you have? Loving the picture you posted Mike, as you know, they're my favourite series of Creda machines.
Hass.


Post# 897855 , Reply# 8   9/9/2016 at 06:31 (2,758 days old) by Launderess (Quiet Please, There´s a Lady on Stage)        
Hass!

launderess's profile picture
So good to see you posting again!

Have thought of you often while enjoying your videos on YouTube!


Post# 897859 , Reply# 9   9/9/2016 at 06:57 (2,758 days old) by thelaundrylab (Hampshire UK)        
Launderess!

thelaundrylab's profile picture
Hello buddy, Nice to hear from you..and to hear that I have been missed. Sorry I haven't posted on here much, just blended into the background for a while, though hopefully you'll be seeing me more often. Great to hear your still tuning in to The Laundry Lab YouTube page... and seeing this is a thread about Creda, there's a few Creda adverts on there too!
Hass.


CLICK HERE TO GO TO thelaundrylab's LINK


Post# 897939 , Reply# 10   9/9/2016 at 14:36 (2,757 days old) by Tomturbomatic (Beltsville, MD)        
Christine Creda and I Thank You For Your Good Wishes

She is a model CWA 242 17064E. The number below that might be the serial number: 21173555.

 

As I have described before, she has two large dials; one is the timer dial  and the other dial sets the wash water temperature all the way from no heating up to 200F. There are 4 rocker switches: on the right is the On/Off switch, next the Slow Spin switch, then the SUPER WASH switch for more water and finally; Wash, Rinse Hold. The dispenser drawer is at the far left.

 

The cycles are as follows:

 

P Prewash

A 200F Whites

B 140F Colors Fast

C 105 Colors Non-Fast

D 120F Nylons/Poly-Cotton

E 105F Acrylics

F Fast Wash

G 105F Woolens

 

A-C are on the Normal cycle and D through G are on the shorter cycle. The water temperatures are independent of the cycle setting. I use C at 115F for shirts.

 

The parts should be here by Wednesday the 14th and surgery is scheduled for Monday the 19th. Jeff will be scrubbing and I will be assisting.

 

Have a great weekend.

Tom


Post# 897955 , Reply# 11   9/9/2016 at 16:07 (2,757 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)        

foraloysius's profile picture
Creda had a great American website. IIRC there was a big picture with a lot of yellow in it on the homepage or the homepage was yellow. At least in my memory, but I'm not sure. Anyone have a picture of that website from back then?

Post# 897976 , Reply# 12   9/9/2016 at 18:25 (2,757 days old) by ilovewindex (Tualitan OR)        

ilovewindex's profile picture
Wow, looks like a right nifty achine

Post# 900615 , Reply# 13   9/27/2016 at 05:44 (2,740 days old) by Tomturbomatic (Beltsville, MD)        
Perhaps Final Report On the Replacement

I was absolutely amazed at the difference in spin speed with the new brushes when I washed the weekly load of shirts. The original belt looked to be in fine condition after 20+ years.

Vivat Creda!



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy