Thread Number: 67539  /  Tag: Modern Dishwashers
how to find tech data sheet 		[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 902685   10/11/2016 at 17:00 (2,745 days old) by sel8207 (naples, florida 34117)        

I have a whirlpool du1055xtsq3 quiet partner i dishwasher. Am having trouble with electronic control panel. Looked it up online and it says that there is a tech data sheet behind the lower front kick panel. It's gone. Was wondering if anyone knew how to get one. They have parts, owners and installation manuals online, but no tech data sheet. Have tried different reset codes, that I found online, but none of them work. I suppose it looks like a wiring diagram and entry code sequence diagnostic. if anyone know where I can get that information, please let me know. thanks for your assistance in advance. les.




Post# 902708 , Reply# 1   10/11/2016 at 20:01 (2,745 days old) by Lorainfurniture (Cleveland )        

W10130990 Is the part # for the tech sheet. What's the problem with the dishwasher?

Post# 902714 , Reply# 2   10/11/2016 at 20:29 (2,745 days old) by sel8207 (naples, florida 34117)        
control board problem

 Purchased for relative about 4 years ago. used about 5 times. Moved to my house. Does not start up. I can get the drain motor to turn on, although it has no water in it. At one point, I got all the control panel lights to turn on. (although I don't know what sequence of buttons caused that to happen.) Several hours later, when I was gone from the house, it started and ran. was running when I returned. Am basically fed up the computer board driven dishwashers and washers. But if I could get it to run… I know that it has to have hot water in it, so I will put it in the house and drain the tepid water from the supply line, then try to start it. Right now it's on the lanai where I am working on it. Already ditched (tonight) the "gold" series whirlpool in the kitchen. (it's 'gold alright.) Now that one is out to be picked up by the trash man. If I could figure out the sequence to make all the lights come on to'reset' it, (the new used one) then maybe this one would work properly. (or work at all). les.

Post# 902718 , Reply# 3   10/11/2016 at 21:01 (2,745 days old) by sel8207 (naples, florida 34117)        
correct number

 That is the correct number for the tech data sheet, but most places says that it is NLA. Oddly, Sears says 'this part must be ordered by a technician', which I thought was kind of strange. A couple of places did have it, but cost plus shipping is over eleven dollars. Well, I'll see what happens when I bring it inside tomorrow, plug it in and see if I can get it to work. thanks much. Les.

Post# 902721 , Reply# 4   10/11/2016 at 21:42 (2,745 days old) by Lorainfurniture (Cleveland )        

I'm pretty sure the key dance is to pick any 3 keys and press it 3x.

Like 123,123,123. If that doesn't work try it with 4 keys. If it works it should reset after about 15 minutes



Post# 902740 , Reply# 5   10/12/2016 at 05:48 (2,745 days old) by sel8207 (naples, florida 34117)        
thanks for the information

 Am going to try that after I put it back into the kitchen. Will let you know if it works. Les


Forum Index:       Other Forums:                      


Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members Click Here To Sign Up.



                     

automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
 Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals 		Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy