Thread Number: 68005
/ Tag: Vintage Automatic Washers
1967 Kenmore Dryer in new home |
[Down to Last] |
Post# 907146   11/15/2016 at 19:14 (2,711 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
2    
Had time last weekend for a quick trip to get this from John L. The matching washer is now in Australia, so it will have a Pen-Pal!. I put it on wheels like my other dryers, but the mounting holes are not made as well as the Maytag I put on wheels, so I had to reinforce 2 mounting holes with washers as there were torn out after tilting it upright. The drum has virtually no wear. I have to wait till the next load to try it out, and Im sure it will be a fun attraction at the next wash in. Thanks to Jason for help getting it in the back of the Traverse!
|
|
Post# 907151 , Reply# 1   11/15/2016 at 19:36 (2,711 days old) by Philcoford (Maryland)   |   | |
Checkrate/Likes
 
1    
I had a 68 version once, best automatic drying I have had. You will like it. Scott |
Post# 907153 , Reply# 2   11/15/2016 at 19:41 (2,711 days old) by countryford (Austin, MN)   |   | |
Checkrate/Likes
 
1    
|
Post# 907156 , Reply# 3   11/15/2016 at 19:46 (2,711 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
1    
Here the wheels...just make sure they fit the threads and be careful when you tip it upright after the wheels are installed
View Full Size
|
Post# 907158 , Reply# 4   11/15/2016 at 19:54 (2,711 days old) by Gyrafoam (Wytheville, VA)   |   | |
Checkrate/Likes
 
1    
Those are really good dryers. Congrats! |
Post# 907184 , Reply# 5   11/15/2016 at 20:46 (2,711 days old) by akronman (Akron/Cleveland Ohio)   |   | |
Checkrate/Likes
 
1    
|
Post# 907212 , Reply# 6   11/16/2016 at 04:43 (2,711 days old) by scoots (Chattanooga TN)   |   | |
Checkrate/Likes
 
1    
|
Post# 907228 , Reply# 7   11/16/2016 at 08:35 (2,711 days old) by Volvoguy87 (Cincinnati, OH)   |   | |
Checkrate/Likes
 
     
I hope to see it at your next wash-in!
I have taken a note from you and am putting my un-matched dryers on wheels. I can't do that with my matched dryers, as then their height wouldn't line up with their washers. I am afraid to put washers on wheels because of the potential for movement during the spin cycle. Enjoy it! Dave |
Post# 907494 , Reply# 8   11/18/2016 at 10:23 (2,709 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
     
|
Post# 907572 , Reply# 9   11/18/2016 at 21:19 (2,708 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
1    
|