|
Thread Number: 69966
/ Tag: Modern Automatic Washers
Frigidaire Agitator Top Loader |
[Down to Last] |  |
Post# 928871 3/25/2017 at 15:02 (2,585 days old) by logixx  (Germany) |
||
Another possible choice for agi fans.
www.ajmadison.com/cgi-bin... www.frigidaire.com/Washers-Dryers... | ||
|
|
Post# 929002 , Reply# 1 3/26/2017 at 06:30 (2,585 days old) by Frigilux (The Minnesota Prairie) |
||
 | ||
| Post# 929005 , Reply# 2 3/26/2017 at 06:55 (2,585 days old) by joeypete (Concord, NH) | ||
 | ||
|
Post# 929013 , Reply# 3 3/26/2017 at 08:22 (2,585 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
New FD Top Load Washers While these may look like a GE they are very different underneath.
Hi Eugene, yes I was thinking of you the other week in regard to the very short lived FD TL washers with the one piece impeller-tub washers. I have seen only two of these machines in the field [ they both had bad inverters ] It is too bad they were such poor performers as they were actually very ruggedly built. I guess that I should grab one now as they will probably be a rare machine in the future. | ||
|
Post# 929021 , Reply# 4 3/26/2017 at 09:08 (2,585 days old) by henene4 (Heidenheim a.d. Brenz (Germany)) |
||
|
Haier has these now... www.haieramerica.com/product/hltw... | ||
|
Post# 929029 , Reply# 5 3/26/2017 at 09:55 (2,585 days old) by logixx (Germany) |
||
|
So it's a Haier | ||
| Post# 929036 , Reply# 6 3/26/2017 at 10:40 (2,585 days old) by johnb300m (Chicago) | ||
 | ||
| Post# 929088 , Reply# 7 3/26/2017 at 16:49 (2,584 days old) by joeypete (Concord, NH) | ||
|
| ||
|
Post# 929091 , Reply# 8 3/26/2017 at 16:54 (2,584 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands) |
||
 | ||
|
Post# 929096 , Reply# 9 3/26/2017 at 17:21 (2,584 days old) by logixx (Germany) |
||
|
| ||
| Post# 929104 , Reply# 10 3/26/2017 at 18:20 (2,584 days old) by WP-Dude22 (Trinidad and Tobago ) | ||
|
So we have had this in Trinidad for a while maybe 2 years but this model is more advanced. bad news the agitator is a one piece design. it does a 360 one direction and then back but it can also do 90 degree strokes. the models we have has a dispenser right below the lid where water usually comes from. it seems like a good design | ||
| Post# 929132 , Reply# 11 3/26/2017 at 21:16 (2,584 days old) by Stricklybojack (South Hams Devon UK) | ||
 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
