Thread Number: 73486
/ Tag: Wanted to Buy Items
In Search of a White Maytag DE-806 Dryer (Blue Panel) |
[Down to Last] |
Post# 970433   11/28/2017 at 17:50 (2,311 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
The time has come to find the illusive Maytag DE-806 dryer. I have been downsizing and currently have my faithful Whirlpool portable dryer in service. All the other dryers are gone. As much as I LOVE vintage machines, the reality of living on the 19th floor is becoming way too obvious. So everything is being trimmed down to 2 washers and one full size 220V dryer. So how about it? Any leads on a decent, white DE-806 dryer? Thanks in advance.
|
|
Post# 970436 , Reply# 1   11/28/2017 at 18:15 (2,311 days old) by rp2813 (Sannazay)   |   | |
Checkrate/Likes
 
1    
|
Post# 970445 , Reply# 2   11/28/2017 at 18:47 (2,311 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
1    
|
Post# 970487 , Reply# 3   11/28/2017 at 22:42 (2,311 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 970488 , Reply# 4   11/28/2017 at 22:43 (2,311 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 970497 , Reply# 5   11/29/2017 at 00:12 (2,311 days old) by rp2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
|
Post# 970532 , Reply# 6   11/29/2017 at 05:50 (2,311 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 970662 , Reply# 7   11/29/2017 at 17:40 (2,310 days old) by rp2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
Yes, HOH dryers were produced in both DE and DG 806 models, intended of course to be paired with the 806 washer, but fit fine with a 106 or anything in between. Our DG 806 was paired with an HA 207 washer. They were in the garage, so the mismatched colors didn't matter.
I was sharing my own experience with a gas model (blue panel) above. I hope the electrics from that same period perform as well as our gas one did.
The experts will have to advise if the model numbers changed on the SOH/big door machines. I think it's likely that DE 806 = HOH no matter what.
So I presume the dryer has to be located a significant distance from your Caloric, otherwise you could run a flexible supply line for a gas model fairly easily. |
Post# 970664 , Reply# 8   11/29/2017 at 17:47 (2,310 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
I have this dryer. It's the SOH dryer, in white. Worked fine when I got it. let me know if this one works for you.
View Full Size
|
Post# 970670 , Reply# 9   11/29/2017 at 18:18 (2,310 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
The Whirlpool dryer is now located in the kitchen, near the window. I broke through the brick and cinder block exterior wall so I can have a direct vent to the outside (no more lint contraptions, YAY!). The space by the Caloric (where the A-107 currently resides), is earmarked for the KDS-58. So no gas model dryer for me. |
Post# 970672 , Reply# 10   11/29/2017 at 18:20 (2,310 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
1    
|
Post# 970675 , Reply# 11   11/29/2017 at 18:29 (2,310 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
1    
|
Post# 970896 , Reply# 12   12/1/2017 at 07:33 (2,309 days old) by Jasonlittle (Southern iowa)   |   | |
Checkrate/Likes
 
     
Kenny is that the pink washer I bought off of you or did you come across another one? |
Post# 970939 , Reply# 13   12/1/2017 at 11:51 (2,308 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 971475 , Reply# 14   12/4/2017 at 11:54 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
I see a DG806 on letgo that's not too far from you, just outside of Philly. The add says it needs a coil and doesn't heat. I'm having a hard time posting the link from letgo but all you have to do is type in vintage maytag and have your distance set to 10+ miles and it should come up |
Post# 971479 , Reply# 15   12/4/2017 at 12:07 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971484 , Reply# 16   12/4/2017 at 12:20 (2,305 days old) by rp2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
|
Post# 971489 , Reply# 17   12/4/2017 at 12:37 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
2    
Sorry, my auto correct put in DG806 instead of DE806 |
Post# 971490 , Reply# 18   12/4/2017 at 12:43 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
1    
Believe me if it was a gas version I would have have scooped it up, he's only asking $25 for it. On top of that it's a five hour drive for me just to get there,all be it I would drive that just not this time. |
Post# 971502 , Reply# 19   12/4/2017 at 14:51 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
1    
|
Post# 971505 , Reply# 20   12/4/2017 at 15:26 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971509 , Reply# 21   12/4/2017 at 15:39 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
It's still there, I can send you the link via email if you want. |
Post# 971510 , Reply# 22   12/4/2017 at 15:42 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
I just sent you the link via your email address you have listed here |
Post# 971511 , Reply# 23   12/4/2017 at 15:42 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971512 , Reply# 24   12/4/2017 at 15:44 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971514 , Reply# 25   12/4/2017 at 15:51 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
1    
Looks like exactly what you are looking for |
Post# 971523 , Reply# 26   12/4/2017 at 16:56 (2,305 days old) by appnut (TX)   |   | |
Checkrate/Likes
 
     
Louie, I apologize for not looking at this thread until now. If I had from the onset, I would have clarified for you immediately it's electric because there was no gas "blue flame" emblem on the face of the control panel as well as the little access door at the bottom right of the front of the dryer. I hope it works out!! |
Post# 971526 , Reply# 27   12/4/2017 at 17:20 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971530 , Reply# 28   12/4/2017 at 17:31 (2,305 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
He had replied to me yesterday, I had asked him for more pics, he said he was out for the day and would get back to me last night but I haven't heard from him since. He said he still had it. |
Post# 971542 , Reply# 29   12/4/2017 at 18:30 (2,305 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971891 , Reply# 30   12/6/2017 at 07:14 (2,304 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 971922 , Reply# 31   12/6/2017 at 10:50 (2,303 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
1    
|
Post# 972004 , Reply# 32   12/6/2017 at 18:04 (2,303 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
1    
|
Post# 972011 , Reply# 33   12/6/2017 at 18:49 (2,303 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
Do you by chance have more than one of those consoles, I'm picking up a DG606 this Saturday but my goal is to have a matching set of 806's. I already have an A608 washer that I would also love to find a 806 console for. |
Post# 972012 , Reply# 34   12/6/2017 at 18:53 (2,303 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
     
I wouldn't give up on that 806 I told you about either. I messaged him again so if he gets back to me I'll definitely let you know. |
Post# 972016 , Reply# 35   12/6/2017 at 19:07 (2,303 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 972075 , Reply# 37   12/7/2017 at 03:21 (2,303 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 972076 , Reply# 38   12/7/2017 at 03:23 (2,303 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 972077 , Reply# 39   12/7/2017 at 03:24 (2,303 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 972088 , Reply# 40   12/7/2017 at 06:00 (2,303 days old) by goatfarmer (South Bend, home of Champions)   |   | |
Checkrate/Likes
 
     
|
Post# 972129 , Reply# 41   12/7/2017 at 11:18 (2,302 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
2    
It's really easy, you just need to get a ballast (around $13, they attach to the cabinet), look at the wiring diagram for the 806 console, and let there be light!!
|
Post# 972131 , Reply# 42   12/7/2017 at 11:40 (2,302 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
     
|
Post# 972138 , Reply# 43   12/7/2017 at 12:00 (2,302 days old) by moparwash (Pittsburgh,PA )   |   | |
Checkrate/Likes
 
1    
|
Post# 972142 , Reply# 44   12/7/2017 at 12:55 (2,302 days old) by ovrphil (N.Atlanta / Georgia )   |   | |
Checkrate/Likes
 
     
|
Post# 974804 , Reply# 45   12/20/2017 at 21:02 (2,289 days old) by Tazz (western massachusetts)   |   | |
Checkrate/Likes
 
1    
I just got ahold of the guy on letgo, he still has this and said he'll be available this weekend for pick up. |
Post# 985892 , Reply# 46   3/8/2018 at 21:26 (2,211 days old) by Ultramatic (New York City)   |   | |
Checkrate/Likes
 
1    
|