Thread Number: 75598
/ Tag: Vintage Automatic Washers
Hoover Logic A8534 Capacity? |
[Down to Last] |
Post# 994215   5/15/2018 at 01:00 (2,166 days old) by Electron1100 (England)   |   | |
Checkrate/Likes
 
     
|
|
Post# 994343 , Reply# 2   5/16/2018 at 06:45 (2,165 days old) by Launderess (Quiet Please, There´s a Lady on Stage)   |   | |
Checkrate/Likes
 
     
|
Post# 994375 , Reply# 3   5/16/2018 at 13:38 (2,165 days old) by keymatic3203 (Cardiff UK)   |   | |
Checkrate/Likes
 
1    
according to the service/parts book, that's a logic 1300 washer dryer with a 5kg load, the drums are about 4cm deeper than the 4.5kg drums. I measured one for you on the weekend. Mathew |
Post# 994378 , Reply# 4   5/16/2018 at 14:14 (2,165 days old) by Electron1100 (England)   |   | |
Checkrate/Likes
 
     
Thanks to all who replied, it is too big.......dam and dam again.
I have been looking for a suitable drum for a Hoover 1100 either the early roller bearing type of the later ball bearing type, I think mine is dying as there appears to wear on the spider shaft, I just want to swap it out as I and a certain engineer from Cardiff are sick of changing the bearings and tubdrum seal, I suppose 35 years is a good life (he said grudgingly) Gary |
Post# 994388 , Reply# 5   5/16/2018 at 18:32 (2,165 days old) by optima (Cumbria England)   |   | |
Checkrate/Likes
 
     
|
Post# 994448 , Reply# 6   5/17/2018 at 13:43 (2,164 days old) by Electron1100 (England)   |   | |
Checkrate/Likes
 
     
|