Thread Number: 76892
/ Tag: Modern Automatic Washers
Catalyst wont drain |
[Down to Last] |
|
Post# 1007585 , Reply# 1   9/17/2018 at 17:06 (2,019 days old) by DADoES (TX, U.S. of A.)   |   | |
Checkrate/Likes
 
1    
|
Post# 1007654 , Reply# 2   9/17/2018 at 21:59 (2,019 days old) by Spacedogb (Lafayette, LA)   |   | |
Checkrate/Likes
 
     
I went and looked at the machine looks like water has been in the machine for quite a while. Also the tub looks as though there are rust streaks going down the inside. I have a feeling I will have a lot more work ahead of me. |
Post# 1007891 , Reply# 3   9/19/2018 at 22:33 (2,017 days old) by Spacedogb (Lafayette, LA)   |   | |
Checkrate/Likes
 
     
Was able to get 2 pics of the machine. It still has water in it and not sure what to do. Anyone think it’s salvageable? |
Post# 1007933 , Reply# 4   9/20/2018 at 06:40 (2,016 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
Any thing is fixable if you want to spend enough time and MONEY on it. If you are looking for a bargain I would skip this washer, the control boards and membrane control panels on these washers were terrible, I have not seen a working one out in the field for many years, I you want a catalyst WP-KM look for one of the rare models that has a mechanical timer.
John L. |
Post# 1008058 , Reply# 5   9/21/2018 at 05:33 (2,015 days old) by foraloysius (Leeuwarden, Friesland, the Netherlands)   |   | |
Checkrate/Likes
 
     
|