|
Thread Number: 77575
/ Tag: Wanted to Buy Items
Timer A208 |
[Down to Last] |  |
| Post# 1015682 11/24/2018 at 19:26 (1,977 days old) by Kafooty06 (washington ) | ||
 | ||
|
Post# 1015685 , Reply# 1 11/24/2018 at 19:57 (1,977 days old) by coldspot66  (Plymouth, Mass) |
||
|
I have one NIB. Part # is 204454. Are you sure you need a timer? what is wrong with the washer? | ||
| Post# 1015710 , Reply# 2 11/25/2018 at 07:21 (1,977 days old) by Kafooty06 (washington ) | ||
|
| ||
|
Post# 1015714 , Reply# 3 11/25/2018 at 07:40 (1,977 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
 | ||
| Post# 1015720 , Reply# 4 11/25/2018 at 10:27 (1,976 days old) by Kafooty06 (washington ) | ||
|
| ||
|
Post# 1015817 , Reply# 5 11/25/2018 at 23:29 (1,976 days old) by robbinsandmyers (Conn) |
||
Sounds like what my A407 would do in the first spin cycle after 30 seconds 50% of the time. Would shut off like the power was cut and wouldnt restart. If I tapped the timer knob it would restart and be fine the rest of the wash. Turned out to be a burned contact in the timer and I had to find a used timer to cure it.
| ||
| Post# 1015851 , Reply# 6 11/26/2018 at 11:55 (1,975 days old) by kafooty06 (washington ) | ||
|
coldspot66 how much for your timer/ | ||
|
Post# 1015865 , Reply# 7 11/26/2018 at 14:03 (1,975 days old) by coldspot66 (Plymouth, Mass) |
||
|
Try this first. When the washer stops in the middle of a cycle, jiggle the timer know to see if you can get it going again. Does it go completely dead, or can you hear the timer motor whirring, but no motor sound? The timer is $75.00 plus shipping. Let me know, but try this first. John | ||
|
Post# 1015866 , Reply# 8 11/26/2018 at 14:07 (1,975 days old) by coldspot66 (Plymouth, Mass) |
||
|
Another thought....try the permanent press cycle to see if it completes the cycle. The pp cycle does have a pause at the "cooldown" phase after the wash and during the partial drain. Then refills with cold water, agitates and drains and spin normally. Then rinse fill and spin to complete the cycle. | ||
| Post# 1015882 , Reply# 9 11/26/2018 at 17:53 (1,975 days old) by kafooty06 (washington ) | ||
|
thanks
the timer was still making that whirring sound when the washer cut out and did not drain all the water and spin. the timer went on almost to the end of the wash cycle without anything happening so I stopped it turned the dial back to the spin cycle to hopefully drain all that water in the tub it took a couple times to finally drain again and go into spin. I will try this tip you suggest anything to help me out I'd really hate to junk this washer .thank y
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
