Thread Number: 77628
/ Tag: Twin-Tub Washers
AEG Lava Lux |
[Down to Last] |
Post# 1016316   11/30/2018 at 11:14 (1,972 days old) by Slowspin66 (lincoln uk)   |   | |
Checkrate/Likes
 
     
Dear folks not sure if anyone can help me here but I need to replace the bearings on the spinner as they are at the end of their life !!!! I have done a fair few restores but for the life of me I carnt even work how to take the machine apart !!!!! Does anyone have any ideas how to do it or a diagram . It’s made in west Germany and looks a little more complicated than anything I’ve done before !!!! Many thanks Darren
|
|
Post# 1016364 , Reply# 1   11/30/2018 at 22:32 (1,971 days old) by Launderess (Quiet Please, There´s a Lady on Stage)   |   | |
Checkrate/Likes
 
     
At least one member IIRC has same or similar AEG Lavalux, but may not see your message.
There is a European FB group where many of the vintage appliance hobbyists hang out; you might want to post your query there as well to see if gets attention. This and or try contacting above member via his YT page. Good luck! |
Post# 1016407 , Reply# 2   12/1/2018 at 04:23 (1,971 days old) by Keymatic (London / UK)   |   | |
Checkrate/Likes
 
     
|
Post# 1016409 , Reply# 3   12/1/2018 at 05:36 (1,971 days old) by ozzie908 (Lincoln UK)   |   | |
Checkrate/Likes
 
     
|