|
Thread Number: 77628
/ Tag: Twin-Tub Washers
AEG Lava Lux |
[Down to Last] |  |
Post# 1016316 11/30/2018 at 11:14 (1,972 days old) by Slowspin66  (lincoln uk) |
||
Dear folks not sure if anyone can help me here but I need to replace the bearings on the spinner as they are at the end of their life !!!! I have done a fair few restores but for the life of me I carnt even work how to take the machine apart !!!!! Does anyone have any ideas how to do it or a diagram . It’s made in west Germany and looks a little more complicated than anything I’ve done before !!!! Many thanks Darren
| ||
|
|
Post# 1016364 , Reply# 1 11/30/2018 at 22:32 (1,972 days old) by Launderess (Quiet Please, There´s a Lady on Stage) |
||
Hello
At least one member IIRC has same or similar AEG Lavalux, but may not see your message.
There is a European FB group where many of the vintage appliance hobbyists hang out; you might want to post your query there as well to see if gets attention. This and or try contacting above member via his YT page. Good luck! | ||
| Post# 1016407 , Reply# 2 12/1/2018 at 04:23 (1,971 days old) by Keymatic (London / UK) | ||
 | ||
|
Post# 1016409 , Reply# 3 12/1/2018 at 05:36 (1,971 days old) by ozzie908 (Lincoln UK) |
||
Lava lux in reply 1 | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}