Thread Number: 77689  /  Tag: Vintage Dishwashers
1989 In-Sink-Erator ISE Classic Supreme 3000 Dishwasher
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items
Post# 1017114   12/6/2018 at 17:22 by billymac (Boston)        

Hello, my wife wanted to upgrade, no choice but must sell full working ISE Classic Supreme 3000 Dishwasher. CLSUP-2 made in the Hobart KA period. 1989 Model

Model is complete and fully functional, all modes work perfect, dishwasher was removed from service this week and works perfectly as you all know this cleans fast and cleans perfectly. No rust, no chips, all internal parts and racks excellent shape. Complete with original owners guide and install manual, the only issue is a relative staying over broke the soap dispenser door recently because they did not read how to use it.

Dishwasher is located in Andover, Massachusetts, I can bring to Boston weeknights.

Looking for best reasonable offer please.


  Photos...       <              >      Photo 1 of 17         View Full Size



Post# 1017121 , Reply# 1   12/6/2018 at 18:35 by toploader55 (Massachusetts Sand Bar, Cape Cod)        

toploader55's profile picture
Nice Machine.

You'll miss it.


Post# 1017254 , Reply# 2   12/7/2018 at 18:12 by stevet (palm coast florida)        
You are upgrading?

To What? Stainless steel? Why downgrade to what passes for any dishwasher today and keep the ISE and change the panels to Stainless ones? You have the Vari-Pack panel kit already on the machine and all you have to do it have the stainless ones cut to size if you cannot find a set on Ebay and slide them in to place and you have a new dishwasher! One that uses water and detergent to clean the dishes.

The broken dispenser is so easy to change and you will surely find one of them on Ebay or Amazon as well. I believe I sold the one new one I had but if I find it, I will let you know.

They were great dishwashers and actually an upgrade from the similar machines built by Whirlpool with Hobart engineering but they came with the upgraded racks and on your model, the Rapid advance timer. Yours would be equivalent to the K/A 21 and 22 series. The sold well as they were priced lower than their Kitchenaid cousins.


Like Eddie said, "you will miss that machine," the first time you run a load of dishes in your new machine.


Post# 1017266 , Reply# 3   12/7/2018 at 18:57 by RP2813 (The Big Blue Bubble)        

rp2813's profile picture

One thing I can say with confidence is that this is a relatively low use machine.   The painted gray and blue strips on the buttons were worn off on one of my ISE machines.  On the subject machine, only the "normal" button shows slight wear, and that might only be a lighting or camera issue.

 

It sounds like this was an early 21 series from when Hobart was still making them, but it still has the $250K sliding door lock, which I came to prefer over KA's flip-up type.

 

Somebody within striking distance should nab this one if they don't mind the single rinse.


Post# 1017302 , Reply# 4   12/8/2018 at 07:01 by moparwash (Pittsburgh,PA -Next Wash-In...June 2019!)        

moparwash's profile picture
Hide it in the garage until the time comes when the three-hour wash times on the 'upgrade' start getting old..

Post# 1017314 , Reply# 5   12/8/2018 at 09:27 by quincyman (St. Petersburg, Florida)        
Why?

Hobart made machine. Wouldn't trade it for the world.


Post# 1017333 , Reply# 6   12/8/2018 at 12:30 by johnb300m (Chicago)        
Emerson

johnb300m's profile picture
Interesting. Did Hobart always use Emerson motors? Or did they placate Emerson on the ISE line of dishwashers?

Post# 1017342 , Reply# 7   12/8/2018 at 14:12 by RP2813 (The Big Blue Bubble)        

rp2813's profile picture

IIRC, Hobart switched to Emerson motors (maybe when they switched to the reversing type?) and that's how ISE ended up with a piece of the action.  It continued for a while after Whirlpool took over.




This post was last edited 12/08/2018 at 21:23
Post# 1017357 , Reply# 8   12/8/2018 at 16:22 by combo52 (Beltsville,Md)        
ISE Dishwasher

combo52's profile picture
This ISE DW was built around June of 1989, Emerson Electric bought KA in 1986, but this was just a guise as WP really owned KA from 1986 on.

There was never an ISE-KA style DW till WP-Emerson took control of the Kitchenaid brand in 1986, before this there were ISE DWs that were built by WP.

Hobart quit building there own motors with the introduction of the reversing motor 21 series DWs and bought the better Emerson motors instead.

The reversible 21-22 series motors will fit the 18-20 KA DWs, it will just run in one direction and you have to install a start relay.

John L.





Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy