Thread Number: 77710  /  Tag: Vintage Dishwashers
Australian GE Potscrubber Dishwasher
[Down to Last]'s exclusive eBay Watch:
scroll >>> for more items
Post# 1017297   12/8/2018 at 04:05 by mit634 (Sydney)        

Hi Guys,

We have decided to start using an old GE Potscrubber dishwasher that we have had in storage for some time. We hooked it up and it ran through a cycle with no issues except for a small leak where the tub vent tube had perished at its base (this was easy to fix) and another near the drain pump. It looks as though the rubber inlet piece has gone hard and brittle and isn't sealing.

Is this part available to buy anywhere ? I have marked the part on pic #6.

Also any thoughts on the age of the dishwasher ? I think late 1970s to early 1980s. It looks very different from US Potscrubbers of the era. I suspect it might have been designed for the European market and so were sold here being 220-240V.

Thanks all. Appreciate the assistance.
Regards, Tim

  Photos...       <              >      Photo 1 of 6         View Full Size

Post# 1017300 , Reply# 1   12/8/2018 at 05:38 by wilkinsservis (Melbourne Australia)        
Actually rebranded Vulcan Dishlex

wilkinsservis's profile picture
GE had sold an American style Potscrubber in the 1970's , permatuff interior, central wash tower etc but by 1980 they were rebranding these more European style machines with stainless steel interior etc I believe they were still assembled in Australia. My parent's first dishwasher 1982 was the Vulcan version. Not the best design but did enough of the job to be a marked improvement over having to hand wash.

Post# 1017339 , Reply# 2   12/8/2018 at 13:32 by Brisnat81 (Brisbane Australia)        

Hi Tim

That model is based on the Mark 7 dishlex models. Some parts are common to the Mark 8 and later.

Itís getting harder to find spare parts now, but have a hunt on line and see what you can turn up.

The big difference between the Mark 7 and later machines, is that the Mark 7 used a separate drain pump. The later machines reversed the wash motor to drain.



Post# 1017370 , Reply# 3   12/8/2018 at 17:48 by bajaespuma (Connecticut)        

bajaespuma's profile picture
I don't think any part of this machine, except maybe for the front escutcheon, was American made; and that's a good thing. Garbage is reserved for the American customer.

Post# 1017415 , Reply# 4   12/9/2018 at 03:45 by mit634 (Sydney)        

@wilkinsservice and @Brisnat81: Thank you for your insights on the Potscrubber which isn't really apparently ! Your knowledge of our Australian appliance makes and models is really impressive to me. I know now to search Dishlex and Vulcan parts as well. So have I got it right that Vulcan and GE both marketed Dishlex based dishwashers and the Dishlex dishwashers in turn were based on a Euro design ? What Euro make did Dishlex base its models on then ?

@bajaespuma: Thanks for your reply. I feel you American customers always get the very best - the best quality, the most stylish, the biggest range and the most features. Just my observation.


I had more of a look at the Potscrubber leaking drain pump, removing the pump to study it more closely. I originally thought it was leaking from the impeller housing cover and so I made a new seal, however, it did not fix it. I now believe it is leaking from the impeller shaft seal so looks as though I need to find a new pump.

Post# 1017460 , Reply# 5   12/9/2018 at 13:40 by Brisnat81 (Brisbane Australia)        

Hi Tim,

If it has a separate drain pump, you should be able to take it into a repair shop and they should be able to find a replacement pump that will fit. If itís leaking from the seal in the wash pump, I may have a new one somewhere, I canít remember whether I still have it however.

Make sure you connect it to hot water. It does heat the water, but with a 900watt element and 10l of water in the sump it will wash for hours while it heats to 65c if you cold fill.

The earlier Dishlex machines were based off Smeg machines. I have yet to find a European analog of the dishlex design that ran from the late 70s until the mid 90s. The mark 7 is loud as heck, the Mark 8 was the first one that got full sound deafening and actually was quiet. The Dissssshhhhhhhhhlex advertising started with the Mark 8. Yours will sound like a true GE in operation. 🤣



Post# 1018070 , Reply# 6   12/15/2018 at 01:03 by mit634 (Sydney)        

Hi Nathan,

Thanks for your advice and apologies for the delay in responding.

I've found a pump that I think will work. It's in the mail so fingers crossed.

Funny how we all remember those Dissssshhhhhhhlex commercials from the 80s. I'm no stranger to loud dishwashers as I also use a Kitchenaid KDS-17. I rather enjoy the sound it makes as I imagine what's going on inside.

Regards, Tim

Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy