Thread Number: 77921  /  Tag: Vintage Dryers
57 GE Dryer has decided to start smoking for the New Year...
[Down to Last]'s exclusive eBay Watch:
scroll >>> for more items
Post# 1019501   12/30/2018 at 15:14 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

Not having a good 2018 with dryers it would seem...   

I popped a small load into the 57 GE this afternoon, set the automatic dry to Delicate, and in about 10 minutes, the dryer was smoking.  The smoke seemed to be coming from the rear of the appliance. I did not immediately notice if it was still running when I dashed to the breaker panel, but I did notice the fluorescent control panel light was off.

My gut instinct (usually is saying that perhaps the transformer burnt.  It was noisier than a hive full of killer bees...   I really hope none of the resistors for the drying system have gone 'pow' on me!

So guess what the first thing I'll be playing with in 2019 will be??  I'd be investigating it tomorrow if we hadn't planned to be in St-Lib for New Year's!

  Photos...       <              >      Photo 1 of 2         View Full Size

Post# 1019506 , Reply# 1   12/30/2018 at 16:04 by pulltostart (Mobile, AL)        

pulltostart's profile picture

It doesn't look like the '57 is sitting next to it's rightful mate.  Perhaps there's some bad vibes between the two machines?



Post# 1019529 , Reply# 2   12/30/2018 at 18:45 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        
Fear not!

turquoisedude's profile picture
Lawrence, the photo may not show it, but this cross-border couple is still together. In fact, they are anxiously awaiting the arrival of a suds-return pump and valve but that's a whole other story... LOL

Post# 1019530 , Reply# 3   12/30/2018 at 18:49 by RP2813 (Too many people know the way)        

rp2813's profile picture

That dryer needs a warning from the Surgeon General pasted on it somewhere.

Post# 1019591 , Reply# 4   12/31/2018 at 12:42 by Ultramatic (New York City)        
Nasty habit.

ultramatic's profile picture



Get it a nicotine patch. tongue-out

Post# 1019608 , Reply# 5   12/31/2018 at 15:12 by Unimatic1140 (Minneapolis)        

unimatic1140's profile picture
I do hope that's just the ballast from the florescent light Paul!


Post# 1019621 , Reply# 6   12/31/2018 at 16:44 by Supersurgilator (Indiana)        

Was the smoking coming from the back of the machine of the back of the drum?

Post# 1019622 , Reply# 7   12/31/2018 at 16:49 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture
It looked like it was coming from the back of the machine, but I didn't spend a lot of time looking before I sprinted to the breaker panel... LOL

Post# 1020026 , Reply# 8   1/3/2019 at 19:55 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        
Turquoisedude investigates....

turquoisedude's profile picture

I got back down to Ogden yesterday with the intention of doing more testing on the GE Clothes Conditioner dryer.  I pulled it out of its 'slot' and disconnected the transformer which I suspected was the problem.  It didn't look good...

  View Full Size
Post# 1020027 , Reply# 9   1/3/2019 at 19:57 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

I figured I had nothing to lose by testing the dryer again.  I set the timer to the air fluff section of the dial and...

Fire in the hole!

  View Full Size
Post# 1020028 , Reply# 10   1/3/2019 at 20:03 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

I observed that the dryer started up immediately without having to press the start button. It ran for about a minute before I observed the smoke and the machine promptly shut off.  I pulled the plug at this point. 

So now my thinking is a motor winding or starting switch is burning.  Not inconceivable for a 61-year-old motor.  Bonus: I acquired a replacement motor (NOS) a couple of years ago. 

Let's just hope I haven't made yet another mis-diagnosis here...

Post# 1020032 , Reply# 11   1/3/2019 at 20:42 by combo52 (Beltsville,Md)        
Smoking Dryer

combo52's profile picture

The ballast for the florescent light looks normal, it should be easy to find out what is smoking, just let your nose guide you to the offending part.


John L.

Post# 1020079 , Reply# 12   1/4/2019 at 08:50 by jetcone (Schenectady-Home of Calrods,Monitor Tops,Toroid Transformers)        
Sounds like

jetcone's profile picture
A sticking start switch in the motor or a sticking relay? Did GE dryers have motor relays??

Post# 1020095 , Reply# 13   1/4/2019 at 11:07 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

Jon, a GE of this era didn't have a relay so I'd concur on the sticking start switch.  

I did some sniffing around and the burnt smell is strongest around the motor.

I also cracked open the new motor box for the first time.  Then I noticed this... I an now not so sure I got me the right motor!  If not, it'll be easier for me to haul out the GE dryer before taking it apart and swap the Inglis in.

Did I potentially goof on the motor??

  View Full Size
Post# 1020098 , Reply# 14   1/4/2019 at 12:04 by combo52 (Beltsville,Md)        
Motor For A 57 GE Dryer

combo52's profile picture

Hi Paul, you have the wrong motor, even if it fits and you rewire the dryer so you can use a 240 volt motor               [ should be 120 volts ]          in this dryer, you will still have to find a larger motor pulley to get a 50 cycle motor to turn the drum fast enough to properly tumble the clothing load.


Good news is it will be quieter with the fan turning 15% slower, LOL.


[ Do hang onto that motor, it would be very helpful to retrofit into a GE dryer for our friends on the other side of the pond ]


John L.

Post# 1020100 , Reply# 15   1/4/2019 at 12:39 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

Dammit... I should have realized when a NOS dryer motor materialized there had to be a catch!

Looks like the GE will be back in the garage for the winter. It can keep the 59 Frigidaire company...LOL 

Curious though, would GE have even marketed a machine like this for the UK market??

Post# 1034989 , Reply# 16   6/10/2019 at 13:57 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        
GE dryer motor repairs made.... not exactly easy....

turquoisedude's profile picture

Now that the 59 Frigidaire is fully functional again, I wanted to attack the 57 GE dryer.  It was banished to the garage due to its nasty smoking habit; my 'prime suspect' was the motor.

'Course to get to a GE dryer motor, you have to take out the drum, which means taking off the cabinet top and the front

  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 1034990 , Reply# 17   6/10/2019 at 14:09 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

Even without a lot of diassembly, I had a good idea of where the problem was...

  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 1034991 , Reply# 18   6/10/2019 at 14:12 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

So, cause of smoke: bad high-wattage connection to heaters. Cause of bad connection: a bad starting switch.  I am getting quite well-versed in this issue it would seem...

  Photos...       <              >      Photo 1 of 2         View Full Size
Post# 1034992 , Reply# 19   6/10/2019 at 14:16 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        

turquoisedude's profile picture

After removing the burnt switch parts, I  put the motor back together again and tried powering it up.  It started and ran fine!!


I had not expected this - I only connected the run winding terminals to AC power.  I was sure that I had to at least momentarily connect the start winding for the 57 GE washer motor to make it run....

  View Full Size
Post# 1034993 , Reply# 20   6/10/2019 at 14:23 by turquoisedude (Ogden & St-Liboire (where??), QC, Canada)        
So, what's next??

turquoisedude's profile picture

This is the question.... I have options though!


Option 1: keep the motor as is; use a relay to control power to the heaters (if it worked for ths 59 Frigidaire....)


Option 2: replace the start switch with the NOS one I got at Modern a few years ago. The motor would then control power flow to the heaters.


Option 3: cannibalize the replacement motor that is a 240 volt one - use the old-style but unused start switch from it.


I am leaning towards option 1....


I am a little perturbed by the motor starting up without the start winding....

Could this be another problem? If I hook up the start winding to power as a test, could I damage the motor??

  View Full Size
Post# 1034994 , Reply# 21   6/10/2019 at 14:28 by foraloysius (Leeuwarden, the Netherlands)        

foraloysius's profile picture
"Curious though, would GE have even marketed a machine like this for the UK market??"

Make that European. I know somebody who's parents had a 50's GE set, they lived in Rotterdam.

Post# 1034997 , Reply# 22   6/10/2019 at 15:16 by swestoyz (Cedar Falls, Iowa)        
Crispy GE Motor

swestoyz's profile picture

The windings in the 240v/50 cycle motor are more than likely the only parts that are different between the two motors.  

If I were in your shoes I'd probably grab the switch from the 50hz motor, swap it in the original motor, AND install a relay that is controlled by the centrifugal switch to turn on the high current heaters, leaving the NOS switch from Larry for a rainy day.  

Guessing the motor started by powering the run winding due to it be powered without a load.


Post# 1035036 , Reply# 23   6/10/2019 at 19:57 by sfh074 ( )        
No load ......

was the only reason it started. Would not have if it were in the dryer unless start winding energized.

Option 1!, Option 1!

Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy