Thread Number: 77965  /  Tag: Modern Automatic Washers
awn432s on ebay
[Down to Last]

Cool Washer Stuff on Amazon:
scroll >>> for more items
Post# 1019755   1/1/2019 at 19:13 by rancherman (nebraska)        

still a day an half to go, and the bid is $1600.
NIB 2017 'never opened'.
https://www.ebay.com/itm/Speed-Queen-AWN...


Post# 1019756 , Reply# 1   1/1/2019 at 19:24 by LowEfficiency (Iowa)        

lowefficiency's profile picture
Sounds like the seller has had trouble with non-paying bidders...
The previous two auctions ended at $1,825 and then $2,520!!


Post# 1019767 , Reply# 2   1/1/2019 at 20:41 by Lorainfurniture (Cleveland )        

That’s crazy. The washer is not that good. Some people have in their minds that this washer is some unicorn or something. It’s worth $800, not more than that.

Post# 1019769 , Reply# 3   1/1/2019 at 21:02 by RP2813 (The Big Blue Bubble)        

rp2813's profile picture

I agree 1,000% with Eugene.  SQs are overrated, lousy rinsing, belt-eating machines.  Sure they're the last of the old school design, but that doesn't mean they clean any better than other long-stroke machines ever did.  They're just all that's left, if you can find one.

 

Why do I feel qualified to make such a statement?  Because I had a '97 SQ clone Amana -- virtually the same machine as what Alliance turned out until the '18 models -- that was on its third belt when I dumped it after nine years, and it rinsed so poorly (even with the "Extra Rinse" switch constantly in the "on" position) that I had to deal with oversudsing issues for a while in the Duet that replaced it due to significant levels of non-he detergent residue the Amana couldn't rinse out -- and if anything, I'm an under-doser.

 

 


Post# 1019782 , Reply# 4   1/2/2019 at 00:23 by chetlaham (United States)        

chetlaham's profile picture
Compared to what is currently available, I do not blame anyone for bidding that high. These clean very well, are super quick, no electronics, no lid lock, best balancing of any machine probably ever made, and last a along time. Very gentle delicate cycle, and the spin drain stops residue rings from forming around the top of the tub and agi.


Other options are a used TL washer where longevity will be unknown. There is the Maytag and Whirlpool commercial TL option, but they still do not surpass Speed Queen in all categories. Rinsing yes.


To compare Amanas and Speed Queens because they look the same with the front panel off is unfair. SQ redesigned everything that was wrong with the Amana and then some. They are not the same machines.

As these become really scare those who really want one will become desperate especially when you know that for the next 15-25 years you will have the classical design which you have come to know and love.


Post# 1019785 , Reply# 5   1/2/2019 at 00:41 by Launderess (Quiet Please, There´s a Lady on Stage)        
Happens All The Time

launderess's profile picture
Ebay, CL, you name the site and you'll find some clever chops that didn't do their homework on just how expensive shipping a large appliance is, especially several states away.

That and or they simply bid up the item so no one else could get it; then back out when seller calls their marker.


Post# 1019787 , Reply# 6   1/2/2019 at 01:25 by mrsalvo (New Braunfels Texas)        

Though there may be some that would disagree with me, I'd say the machine is worth the original purchase price of $800, however, if one had to pay any kind of tax or shipping on it and it went up to over $900, then I'd say no.

I own a 2015 AWN432SP that I paid $1,019.00 that included tax and a steep $100 delivery charge and honestly, I think its a well built machine for what it was designed to do. Having said that, I'm on the fence about some issues with it. The owners manual states 3 TIMES, do not overload it, period. They state a large load consists of 2 full or queen size sheets, 4 pillow cases, 2 nightgowns, & 1 pair of men's pj's.....and that's it. By todays standards of larger capacity machines, that would be considered a small load. (Honestly, I'd NEVER wash anymore than what they state, I'd get holes in shirts, frayed hemlines, and ripped towels, and a loud struggling transmission. I can see broken belts happening if it was overloaded as well.) I'd say the total usable capacity is about 12 lbs, damage free clothing.
For the size loads that it can wash it sure uses an awful lot of water, given the use of a 2nd rinse if it's needed, which is often depending on the detergent. Low sudsing detergents are a near must if you don't want a high water bill. I never use the soak cycle, as it spins the water out. I think it uses about 27 gallons per fill on a full load size. Full load: Presoak, wash, rinse, 2nd rinse would be 108 gallons of water....for what they consider full load. In short, it can be very expensive to run given high water rates around the country....and I've seen this in our own water bills.

This machine was no doubt designed and built for a coin op laundrymat, no doubt in my mind.

The things I do like about it are: fast cycle times, and hot tap water.

I would think there are better machines out there for residential use. Maybe their front loader would be better.

That's my experience and take on the machine.

Barry


Post# 1019794 , Reply# 7   1/2/2019 at 08:28 by rancherman (nebraska)        
People do wierd things when NIB or. last one is printed

And apparently on appliances too!
I paid 919 for mine, LWN432 'delivered' from somewhere from the Bronx. (still waiting)

During the weekend, I've found them at actual drive up, back up to the dock, and load her up places for just over 700. www.coinomatic.com/new-la...
Sams Stores shows them for 799 www.samstores.com/product...
Throw in sales tax, and the cost to get it home.. I think I paid 'accordingly' for mine.

I really wouldn't want to drive into the pit of Chicago, Even though I could probably make the round trip for about 150 bucks. Last time I was in Chicago, I vowed never to go back. Neat things to do and see, but the driving isn't for the non-combatant! I did get pretty good at throwing toll money at the basket!


Post# 1019811 , Reply# 8   1/2/2019 at 11:01 by Vintage1963 (Ohio)        

vintage1963's profile picture
That washer is most certainly not worth $1600. I wouldn't pay anywhere near that price.

Post# 1019822 , Reply# 9   1/2/2019 at 14:51 by RP2813 (The Big Blue Bubble)        

rp2813's profile picture

Really?  Toll money thrown into the basket?  I thought that went away long ago.  Brings back memories of trips from suburban Chicagoland to northern Wisconsin back in the '60s in my uncle's big Mercury with the electric back window that went up and down.

 

Around here, all bridges have more cashless (aka "Fast-Trak" account) lanes than pay lanes, and you can't even use the HOV lanes without a Fast-Track transponder in your car.  The Golden Gate Bridge is entirely cashless and uses Fast-Trak as well as license plate photos for billing.

 

@Barry:  AMEN!


Post# 1019824 , Reply# 10   1/2/2019 at 15:09 by twintubdexter (Palm Springs)        

twintubdexter's profile picture

"a unicorn or something"...I like that!


Post# 1019959 , Reply# 11   1/3/2019 at 09:17 by rancherman (nebraska)        
yeah, it's been 15 yrs since my 'visit' to chic

They did have the fast pay lanes, but since I was only there as a visitor, I didn't have that capability..
1 quarter, 1 dime, one nickel. rinse and repeat. geez, I think I spent 12 bucks just to get to the hockey arena... another 12 bucks to 'get the hell out of Dodge'.. Outbound traffic seemed more sane however..
I had to really 'knuckle up'.. I was in a beat-up 4 cylinder 1987 Chev S10... I noticed I was hugely underpowered in the drag races away from each toll booth. 10 lanes converging into 4 or 6. My co-pilot did the scouting, and keeping the loose change flowing. If not for her, I wouldn't be conversing here today. I know I'd been a road kill for sure.
Remember the movie Terminator, when they were being chased, and Arnold says;
This is the vehicle's top speed... 67 mph. That's what I was driving.
Road Warrior.. I am not. ;)


Post# 1019963 , Reply# 12   1/3/2019 at 10:16 by LowEfficiency (Iowa)        

lowefficiency's profile picture
$1,800 with 2 1/2 hours remaining...

Post# 1019968 , Reply# 13   1/3/2019 at 11:12 by kskenmore (Kansas)        
awn412

I gave up on my old 1996 Kenmore 90 series when I found a few years old SQ AWN412 at an estate sale. Paid $150. Very happy!

Post# 1019977 , Reply# 14   1/3/2019 at 12:47 by LowEfficiency (Iowa)        

lowefficiency's profile picture
Auction ended at $1,875.
(Shipping not included.)


Post# 1019982 , Reply# 15   1/3/2019 at 12:53 by ea56 (Sonoma Co.,CA)        
As PT Barnum Once Said,

ea56's profile picture
there’s a sucker born every minute!

Eddie


Post# 1020041 , Reply# 16   1/3/2019 at 22:20 by GusHerb (Chicago/NWI)        
Driving in Chicago

If you can drive around Chicago you can drive anywhere. When I went to the NYC area the first time I was worried it would be even worse than Chicago but turned out it was actually a little bit more civilized despite the amount of people on the road, and the crazy roads in NJ. People just drive like wild animals in the Chicago area period.

Also, the toll change baskets were gotten rid of at least 10 years ago.

And to keep it on topic; I love my SQ but wouldn’t pay over $800 for one like Eugene said. People can over hype them but they do clean very well and I personally find mine to do a pretty good job at rinsing. We had the Raytheon Amana machines and while they were basically the same thing, there were plenty of minor tweaks made that made the Alliance SQ’s considerably better than those Amana’s all around.


Post# 1020385 , Reply# 17   1/6/2019 at 20:03 by man114 (Buffalo)        
Amana

The Amanas are mostly fine though, my parents have the digital control one purchased when Circuit City stopped carrying appliances. Has only needed one belt in its life, still going strong.

As far as this one I don’t see why you just wouldn’t buy a full fledged commercial washer at that cost.


Post# 1020417 , Reply# 18   1/7/2019 at 07:18 by combo52 (Beltsville,Md)        
SQ AWN 432 For $1,600.00 +

combo52's profile picture

Is not really a bad buy considering we sold over 800 of them at prices ranging from $800-1000 when you consider the only other way to get one now is the commercial model with no WL control and NO labor warranty for about the same money.

 

John L.


Post# 1020419 , Reply# 19   1/7/2019 at 09:13 by Yogitunes (New Jersey)        

yogitunes's profile picture
that price can be on the steep side, but if that's what you want, go for it....


just understand, you did not increase the value of one of these by any means....


as we all have seen, a person like this will be looking to sell it in a few years for what ever reason, and their going to claim that they paid 1800.00+ for it, plus shipping, and whatever fees....


the machine is still only going to be worth 200 to 300 tops....


heck I seen people buy stuff, use it for a few years, and still looking to recoup everything they put into it, and then some....


doesn't matter what you paid or went through to get it.....its only worth what anyone is willing to pay for it....and that's it....

hopefully they will enjoy it for a very long time...


Post# 1020452 , Reply# 20   1/7/2019 at 15:20 by LowEfficiency (Iowa)        

lowefficiency's profile picture
Another new 2017 Speed Queen has appeared on eBay, this time in Ohio.
AWN432SP, asking price of $2500.

https://www.ebay.com/itm/303019125750...






Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy