Thread Number: 78007  /  Tag: Modern Automatic Washers
VMW Bravos bearing job
[Down to Last]

Cool Washer Stuff on Amazon:
scroll >>> for more items
Post# 1020237   1/5/2019 at 16:14 by cfz2882 (Belle Fourche,SD)        

was given a ~2012 bravos today-it mostly works,but bearings are shot-wondering if a bearing repair on one of these requires any new parts other than seal and bearings?-it's a cool looking machine with a window lid and silver in color :)Might junk it for spare parts if bearing job expensive... :)

Post# 1020238 , Reply# 1   1/5/2019 at 16:34 by Yogitunes (New Jersey)        

yogitunes's profile picture
is yours an 'X' belt drive, or an 'XL' direct drive.....there are a few little differences in disassembly...

bearings and seals alone not too bad.....

its when you purchase the whole outter tub with bearings and seals installed that can be major costly...

I did it with tools I already had....

Post# 1020246 , Reply# 2   1/5/2019 at 18:25 by cfz2882 (Belle Fourche,SD)        

it's the belt drive version-I was really hoping I had scored the F&P drive version with recirc pump-have found some of those at the dump,but they have always been bent up-did salvage a few of the F&P style motors though.Thanks for those links-I'll get it apart for evaluation soon :)

Post# 1020264 , Reply# 3   1/5/2019 at 21:05 by Yogitunes (New Jersey)        

yogitunes's profile picture
if its a belt drive.....your most likely have to go through these sort of least of tearing it apart....

Post# 1020267 , Reply# 4   1/5/2019 at 21:44 by combo52 (Beltsville,Md)        
Bad Bearings On A WP VMW Washer

combo52's profile picture

Replacing the bearings on the BD models is much easier, BUT much more costly, you basically have to replace the complete transmission-shaft-and seal assembly, we have only done this a few times as the repair costs about 2/3 of the price of a new washer


John L.

Post# 1021523 , Reply# 5   1/17/2019 at 19:50 by cfz2882 (Belle Fourche,SD)        
bit the dust...

transmission shaft was damaged along with some other parts,so junked the machine-saving a large stash of spare parts-including lid switch/lock used to repair a VMW centennial :) The bravos was made around 4th quarter of 2010.

Post# 1021551 , Reply# 6   1/18/2019 at 03:09 by Lorainfurniture (Cleveland )        

Sell the board on eBay.

I donít mind getting those in anymore, I recover my cost of the machine at minimum selling the board.

Post# 1021836 , Reply# 7   1/20/2019 at 12:19 by cfz2882 (Belle Fourche,SD)        
bad boards-bad capacitors...

When I got my 2010 cabrio,it was a faulty board that had it out of commission-board problem was caused by bad capacitors on the"assembled in China"control board-replaced the junk capacitors with quality ones and cabrio was back in operation :)Cabrio was an early one-built around 1st Q 2010.When I take the board out of the Bravos(I kept the whole top)i'll look it over for junk capacitors even though that machine was basicly working :)

Forum Index:       Other Forums:                      

Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In

New Members
Click Here To Sign Up.

Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy