Thread Number: 78073
/ Tag: Vintage Dishwashers
What is needed to create a Hobart made Superba selectra 21 |
[Down to Last] |
Post# 1020843   1/11/2019 at 17:51 (1,925 days old) by Bmr6969 (columbus ohio)   |   | |
Checkrate/Likes
 
     
Soooo I have two 21 machines 1 is an imperial selecta what all do I need besides an acquired selctra timer (Superba) and a front control panel Superba Selectra solid state controls will be needed ? |
|
Post# 1020858 , Reply# 1   1/11/2019 at 21:29 (1,924 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 1020860 , Reply# 2   1/11/2019 at 21:35 (1,924 days old) by Bmr6969 (columbus ohio)   |   | |
Checkrate/Likes
 
     
Is the harness going to different from an imperial? Or just the computer module that it connects to |
Post# 1020867 , Reply# 3   1/12/2019 at 00:25 (1,924 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
     
|
Post# 1020871 , Reply# 4   1/12/2019 at 03:28 (1,924 days old) by Bmr6969 (columbus ohio)   |   | |
Checkrate/Likes
 
     
Ahh ok what did the imperial Selctra use? |
Post# 1020890 , Reply# 5   1/12/2019 at 08:32 (1,924 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
1    
The selectra 21 and the 22 series KA DWs all used a more conventional control all in one unit in the control panel, All of these ECDWs were troublesome and are now challenging to repair as parts are all long gone.
There are only 2 or3 that I am aware of still working, we have a KDSS-20 in the museum that still works, this is actually the rarest and IMEO the best one to have if you are actually going to use it as it is the only one with two final rinses.
John L. |