Thread Number: 79353  /  Tag: Vintage Dryers
Maytag DG806
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items
Post# 1032711   5/15/2019 at 15:26 by floyde (Los Angeles, CA)        

I have a 1979 dryer and would like to get a new belt. Does anyone have a model number of the belt I could order?

Thank you!





Post# 1032715 , Reply# 1   5/15/2019 at 16:05 by coldspot66 (Plymouth, Mass)        

If this is a halo of heat dryer it uses 2 belts...Y311013 & Y 311012. They are still available.

Post# 1032748 , Reply# 2   5/15/2019 at 22:24 by Maytag85 (Sean A806)        

maytag85's profile picture
Since itís from 1979, itís a newer style of Stream Of Heat dryer. Maytag SOH dryers arenít bad, but they donít dry as evenly as the HOH dryers, but they are still decent dryers.

Post# 1032749 , Reply# 3   5/15/2019 at 22:24 by floyde (Los Angeles, CA)        
No

Itís 1979 so large drum anyone know?

Post# 1032750 , Reply# 4   5/15/2019 at 22:30 by Maytag85 (Sean A806)        

maytag85's profile picture
Your Maytag DG806 from 1979 has the larger drum, and the Maytag Halo Of Heat gas dryers built before the stream of heat dryers had a standing pilot that had to be lit so the burner would come on, and the newer stream of heat dryers have a igniter and you will see it glow ping when you turn the dryer on.

Post# 1032751 , Reply# 5   5/15/2019 at 22:37 by Maytag85 (Sean A806)        

maytag85's profile picture
QSD-DAN could help you out with your DG806 from 1979. I donít know every single thing about Maytags, but I know more about ĎTags than most people my age, and QSD-DAN knows even more about Maytags than I do and I am still leaning about vintage Maytag machines.

Post# 1032752 , Reply# 6   5/15/2019 at 22:57 by floyde (Los Angeles, CA)        
What does this have to do with my question of a belt

Anyone know.

Post# 1032755 , Reply# 7   5/16/2019 at 00:59 by LowEfficiency (Iowa)        

lowefficiency's profile picture
>> What does this have to do with my question of a belt

Hi floyde, the problem is that you asked for a belt for a dryer that doesnít exist!


The Halo-of-Heat DE/DG806 was only produced until around 1976.
The Stream-of-Heat dryers were then produced until around 1980.

So something is wrong, either your year (1979), or your model (DG806).
Perhaps instead of a DG806, you have a DG608? Or a DG808?


Post# 1032767 , Reply# 8   5/16/2019 at 07:05 by combo52 (Beltsville,Md)        
DG806 Dryer Belts

combo52's profile picture

Yes thank you Dave, MT 806 dryers have two belts and MT808 dryers have one, they are COMPLETELY different dryers, this is why exact model #s are so important.

 

In either case the belts are still readily available,

 

Question why do you think it needs a belt, have you even taken it apart yet, at its age it is likley to need more than just a belt if you are trying to use this dryer much.

 

John


Post# 1032769 , Reply# 9   5/16/2019 at 08:03 by oliger (Indianapolis, Indiana)        

8 replies and not a single answer!
If you know for sure that your dryer is a 1979, this will work:
www.partselect.com/PS1175...


Post# 1032793 , Reply# 10   5/16/2019 at 12:17 by LowEfficiency (Iowa)        

lowefficiency's profile picture
>> 8 replies and not a single answer!

That's because we care about giving the CORRECT answer.
It avoids a lot of wasted time, money, and frustration to get the correct part the first time.


And remember too that we are on a forum here. Resolving this confusion isn't just for floyde - others down the road will find this thread in their search results ("DG806 belt", etc). So resolving the ambiguity may prevent similar problems for others in the future.


Post# 1032807 , Reply# 11   5/16/2019 at 13:31 by oliger (Indianapolis, Indiana)        

Yes, that makes sense. I know that many of you could have told him the same thing I did, but I didn't think about the future searchers. I have used the search to solve problems of my own before. If the dryer is for sure a 1979 (Stream of heat) than it would use the single belt as per #9. If the dryer is not a 1979 and truely is a DG-806, then as stated above it would be a Halo of heat, and would use the dual smaller belts.
A suggestion for Floyde:
Pull the back off of the dryer, if you see one belt, buy here.
www.partselect.com/PS1175...
If you see two belts, you would need to buy both of these.
www.partselect.com/PS1175...
www.partselect.com/PS11757533-Wh...


Post# 1032814 , Reply# 12   5/16/2019 at 14:40 by floyde (Los Angeles, CA)        
Im so sorry for the confusion

It is a DG808.. So I assume Y312959 is the correct belt?

Many thanks, Can someone verify?


Post# 1032819 , Reply# 13   5/16/2019 at 15:05 by oliger (Indianapolis, Indiana)        

Yes, Y312959 is the correct part#. If you buy a higher quality belt, it will be longer before you will have to replace it again.




Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy