|
Thread Number: 79377
/ Tag: Modern Dryers
Who made this Crosley set and opinions about Crosley |
[Down to Last] |  |
| Post# 1032905 5/17/2019 at 18:29 (1,799 days old) by panasonicvac (Northern Utah) | ||
Hi again,
I recently moved again for another internship (This would likely be my last one). This is the set that I'm using for the year. I've never really heard of Crosley until now, maybe I have before but I just don't remember. I've done a little research, turns out they are manufactured by two of my most favorite appliance companies of all time, Whirlpool and Frigidaire. But, I'm curious to know about who actually made this particular set? I typed up the model number of the dryer and unfortunately nothing came up. I'd assume the washer would likely get the same results. So far it's been about a week that I've used this, here are my thoughts so far. They seem basic to me for a frontloader which I like, it wouldn't make sense for me to have something with features that I would hardly use. They both wash and dry really good so far. And I like that I don't need to bend over while loading and unloading from the dryer. The only downfall so far is the height of the washer. Have the same issue with the Duet that I've used a couple years ago but I think I can get used to it again. One thing I'm trying to figure out is how the Options Select feature works. I couldn't find the manual for this so I will continue to research. Anyways, it's too early for me to tell but so far I'm liking both of these. Are there some things that I should get tips on or to watch out for with this set? Another thing that I would like to ask is what are your overall thoughts, opinions, or experiences with Crosley? Is the company really good? Would it be better to buy a Whirlpool or Frigidaire branded set instead of Crosley? Were there any lawsuits that have happened with Crosley before? And what kind of cleaners should I use to get rid of smells inside of front load washers should mold ever get inside? Thanks! | ||
|
Post# 1032906 , Reply# 1 5/17/2019 at 18:40 (1,799 days old) by appnut  (TX) |
||
 | ||
| Post# 1033301 , Reply# 2 5/21/2019 at 08:40 (1,795 days old) by deltablu (Eastern South Dakota) | ||
|
That set is Frigidaire/Electrolux. The topload sets are still Whirlpool built. GE/Haier recently started building kitchen pieces for Crosley. They are sold exclusively to servicing dealers and have better warranty than the basic manufacturer's models they replace. We've sold Crosley for about 30 years and they've been very good to us. | ||
| Post# 1033303 , Reply# 3 5/21/2019 at 08:55 (1,795 days old) by johnb300m (Chicago) | ||
 | ||
|
Post# 1033353 , Reply# 4 5/22/2019 at 00:21 (1,795 days old) by askolover (South of Nash Vegas, TN) |
||
 | ||
| Post# 1033367 , Reply# 5 5/22/2019 at 09:40 (1,794 days old) by whatsername (Denver, CO) | ||
 | ||
|
Post# 1033372 , Reply# 6 5/22/2019 at 10:29 (1,794 days old) by jamiel (Detroit, Michigan and Palm Springs, CA) |
||
 | ||
| Post# 1033373 , Reply# 7 5/22/2019 at 10:33 (1,794 days old) by whatsername (Denver, CO) | ||
|
| ||
| Post# 1033399 , Reply# 8 5/22/2019 at 16:41 (1,794 days old) by deltablu (Eastern South Dakota) | ||
|
The zdm6502as Professional isn't GE; I'm under the impression that it's a Samsung based on the little red "Orbitwash" spinner in the back corner. Haven't actually seen one in person yet. | ||
|
Post# 1033402 , Reply# 9 5/22/2019 at 17:18 (1,794 days old) by appnut (TX) |
||
|
| ||
| Post# 1040360 , Reply# 10 8/2/2019 at 00:21 (1,723 days old) by panasonicvac (Northern Utah) | ||
|
Update
So far it's been almost 3 months since I've used both of these. Overall they've both been still good as far as performance goes. However though, there's already been an issue with the washer. Most of the time the time just freezes whenever there's a load in and it just keeps cycling non stop. It won't unlock the door if you cancel the wash. And the thing just smells horrible like the drainage pipe all the sudden clogged up. We just replaced the drain pump but that didn't solve the rest of the problem. Finally they've decided that they're replacing the washer with a new one. It's going to get picked up tomorrow, I don't know if it's going to be the same one or not but I'll keep this posted to see what it'll be.
Anyways the past couple days I've been temporary using this vintage Speed Queen set until our washer problem gets fixed. Since it's only been a couple times that I've used these and it's likely the only time I ever got to use them, all I can say is that they're just like the ones that I've used a couple years ago which is good. I wouldn't mind owning a Speed Queen set since I hear they're one of the best on the market and I have nothing but positive results with them. I understand they're not cheap but if it's something that's worth an extra mile for, then I'll consider looking into them. | ||
|
Post# 1040421 , Reply# 11 8/2/2019 at 17:10 (1,722 days old) by Frigilux (The Minnesota Prairie) |
||
There’s certainly no doubting the parentage of the Crosley front-load washer! They forgot to Photoshop the Crosley badge onto the photo.
View Full Size
| ||
|
Post# 1040439 , Reply# 12 8/2/2019 at 20:43 (1,722 days old) by Lorainfurniture (Cleveland ) |
||
|
Crosley Fridges were Frigidaire, Currently ge. Same for stoves. Laundry top load is whirlpool, front load was Frigidaire, is ge. Dishwasher was (still is?) midea | ||
|
Post# 1040475 , Reply# 13 8/3/2019 at 07:21 (1,721 days old) by Frigilux (The Minnesota Prairie) |
||
|
| ||
|
Post# 1040480 , Reply# 14 8/3/2019 at 08:27 (1,721 days old) by Lorainfurniture (Cleveland ) |
||
|
It doesn’t, feel free to embed. Thanks! | ||
|
Post# 1040543 , Reply# 15 8/3/2019 at 16:55 (1,721 days old) by Frigilux (The Minnesota Prairie) |
||
|
Update: Eugene's reply #14 isn't a non sequitur!
Originally, I had asked (in reply #13) if embedding a video at AW would rob his view-count at YouTube. Eugene responded to that question. I edited reply #13, deleting my question and embedding his video on the Conservator, a brand featured at the Crosley website. | ||
|
Post# 1040565 , Reply# 16 8/3/2019 at 19:36 (1,721 days old) by gansky1 (Omaha, The Home of the TV Dinner!) |
||
 Some friends of the family have an Amana branded version of this Crosley Conservator in the video and despite my reservations when I first saw it, I've been quite impressed with the performance overall. No complaints from the owners and while it may not be really long-lived for a family of three, it's likely to give every penny's worth of the $349 purchase price. | ||
| Post# 1040911 , Reply# 19 8/6/2019 at 18:49 (1,718 days old) by panasonicvac (Northern Utah) | ||
|
The replacement
So it's not the same model but it is however still a Lux. First impressions, I think the controllers are cool. Reminds me of using my Parent's LG dryer. Very quiet during the washing, rinsing, and drainage process. And it's a little bigger capacity wise. The only downfalls so far is that my socks can get stuck in the drum seal which actually bothers me, the other one rarely did that. It's a bit noiser during the spining cycle. And it uses less water. I'm assuming it's because that's part of the energy efficient feature that it uses but I think I like using washers with more water in them the best. That's pretty much it for now since it is still brand new and it's too early for me to tell if I either like it more or less than the Crosley.
View Full Size
| ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}