|
Thread Number: 79733
/ Tag: Vintage Dryers
Parts Quiz |
[Down to Last] |  |
| Post# 1036319 6/24/2019 at 22:23 (1,765 days old) by stricklybojack (South Hams Devon UK) | ||
.
What brand and type of appliance does this part come from? Extra credit, what’s its purpose?
View Full Size
| ||
|
Post# 1036324 , Reply# 1 6/24/2019 at 23:08 (1,765 days old) by Lorainfurniture  (Cleveland ) |
||
|
Whirlpool built 29” dryer, is it for noise isolation ? | ||
| Post# 1036328 , Reply# 2 6/25/2019 at 03:22 (1,765 days old) by toploader55 (Massachusetts Sand Bar, Cape Cod) | ||
 | ||
| Post# 1036330 , Reply# 3 6/25/2019 at 03:42 (1,765 days old) by arbilab (Ft Worth TX (Ridglea)) | ||
 | ||
|
Post# 1036340 , Reply# 4 6/25/2019 at 07:12 (1,764 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
Gray Plastic Part ?
Not a detailed enough picture to tell for sure, it might be as Eugene suggested be from a 29" WP built dryer that goes between the side wall of the cabinet and rear balk-head to keep the cabinet from resonating and it also reduces the chance the cabinet will crush when it is shipped.
It could also be the plastic wiring harness retainer that is used to keep the machines wiring away from the moving parts of the machine. John L. | ||
| Post# 1036384 , Reply# 5 6/25/2019 at 20:34 (1,764 days old) by stricklybojack (South Hams Devon UK) | ||
|
| ||
| Post# 1038056 , Reply# 6 7/13/2019 at 14:14 (1,746 days old) by stricklybojack (South Hams Devon UK) | ||
|
.
So that’s where they go! Was in to this Kenmore top filter and I finally saw the critters in situ. | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}