Thread Number: 79868
/ Tag: Vintage Dishwashers
KitchenAid Model KUDS21CA0 - Rinse Aid Dispenser Cap |
[Down to Last] |
|
Post# 1037764 , Reply# 1   7/10/2019 at 17:15 (1,722 days old) by ctv (B.C.)   |   | |
Checkrate/Likes
 
     
Could you take a picture? I am the one that put up a post about a hoard of dishwasher parts, and that model number rings a half-ding in me memory cells.... |
Post# 1037770 , Reply# 2   7/10/2019 at 18:43 (1,722 days old) by RP2813 (Sannazay)   |   | |
Checkrate/Likes
 
     
I think those caps were used on KA machines for a good ten or 15 years, so you're not stuck searching for the exact same model as your machine.
Maybe there's a donor machine curbside in your area. Check the "free" section on Craigslist or the trade-in/scrap pile at an appliance store or repair shop. In the meantime, you can buy one of those Jet Dry rinse aid blocks (if they're still making them) and hang it on the top rack. |
Post# 1037894 , Reply# 3   7/11/2019 at 16:01 (1,721 days old) by WashBroke (SC)   |   | |
Checkrate/Likes
 
     
Notice Screw has sheared off. Thanks for reply.
View Full Size
|
Post# 1037935 , Reply# 4   7/11/2019 at 20:54 (1,721 days old) by ctv (B.C.)   |   | |
Checkrate/Likes
 
     
Yes, I think I have one or more of those. I will look through my stash tomorrow (if it's not raining), and will get back to you. |
Post# 1038543 , Reply# 5   7/17/2019 at 16:35 (1,715 days old) by WashBroke (SC)   |   | |
Checkrate/Likes
 
     
NM |
Post# 1038690 , Reply# 6   7/19/2019 at 03:01 (1,714 days old) by ctv (B.C.)   |   | |
Checkrate/Likes
 
     
Sorry there guy... Had an unexpected car repair to do. Should have a chance to look by this weekend. |
Post# 1038894 , Reply# 7   7/21/2019 at 00:30 (1,712 days old) by Washbroke (SC)   |   | |
Checkrate/Likes
 
     
I appreciate your efforts. Thanks again. |
Post# 1039546 , Reply# 8   7/26/2019 at 20:20 (1,706 days old) by ctv (B.C.)   |   | |
Checkrate/Likes
 
     
Mine looks exactly like yours, minus the chewed-up part above the washer. |