Thread Number: 79885
/ Tag: Vintage Automatic Washers
Unimatic agitator rubber parts ..... |
[Down to Last] |
|
Post# 1037946 , Reply# 1   7/11/2019 at 21:50 (1,744 days old) by Washerlover (The Big Island, Hawai’i)   |   | |
Checkrate/Likes
 
     
|
Post# 1037948 , Reply# 2   7/11/2019 at 22:04 (1,744 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
1    
|
Post# 1037949 , Reply# 3   7/11/2019 at 23:00 (1,744 days old) by hippiedoll ( arizona )   |   | |
Checkrate/Likes
 
1    
|
Post# 1037952 , Reply# 5   7/11/2019 at 23:46 (1,744 days old) by Unimatic1140 (Minneapolis)   |   | |
Checkrate/Likes
 
3    
|
Post# 1037958 , Reply# 6   7/12/2019 at 05:39 (1,743 days old) by Tomturbomatic (Beltsville, MD)   |   | |
Checkrate/Likes
 
     
Do you have as good a progress report on the pulsators for the WO65-2 machines (hope, hope)? |
Post# 1037963 , Reply# 8   7/12/2019 at 07:31 (1,743 days old) by turquoisedude (.)   |   | |
Checkrate/Likes
 
2    
|
Post# 1037965 , Reply# 9   7/12/2019 at 08:09 (1,743 days old) by swestoyz (Cedar Falls, IA)   |   | |
Checkrate/Likes
 
3    
|
Post# 1037968 , Reply# 10   7/12/2019 at 09:38 (1,743 days old) by Tomturbomatic (Beltsville, MD)   |   | |
Checkrate/Likes
 
     
I read someplace years ago that Brasso polishes Bakelite beautifully. It was in an article about Bakelite jewelry and decorative accessories. |
Post# 1037969 , Reply# 11   7/12/2019 at 09:43 (1,743 days old) by golittlesport (California)   |   | |
Checkrate/Likes
 
2    
|
Post# 1038003 , Reply# 13   7/12/2019 at 18:03 (1,743 days old) by lotsosudz (Sacramento, CA)   |   | |
Checkrate/Likes
 
     
|
Post# 1038006 , Reply# 14   7/12/2019 at 18:15 (1,743 days old) by qsd-dan (West)   |   | |
Checkrate/Likes
 
1    
|
Post# 1038192 , Reply# 15   7/14/2019 at 11:10 (1,741 days old) by 300C (Jonesboro, GA)   |   | |
Checkrate/Likes
 
     
Amazing!!! |
Post# 1038200 , Reply# 16   7/14/2019 at 12:42 (1,741 days old) by bajaespuma (Connecticut)   |   | |
Checkrate/Likes
 
1    
You deserve every penny that you can get for your brilliant services. And this is from someone who has every intention of finding and acquiring a Unimatic Custom Imperial 1958 (for the second time in his life) and needing parts.
Is there any possibility that you will be able to work with the plastics that GE used for filter-pans in the future? Or can you make these:
View Full Size
|
Post# 1040223 , Reply# 18   7/31/2019 at 21:03 (1,724 days old) by Marks (Tucker, GA)   |   | |
Checkrate/Likes
 
     
|
Post# 1040228 , Reply# 19   7/31/2019 at 23:39 (1,724 days old) by scrubflex (bronx, new york)   |   | |
Checkrate/Likes
 
     
Wow...AMAZING...looks like it's designed from the manufacturer...EXCELLENT work |