Thread Number: 80409  /  Tag: Vintage Automatic Washers
The "Card Table" Vibration Test
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1043582   9/2/2019 at 13:31 (1,668 days old) by LowEfficiency (Iowa)        

lowefficiency's profile picture
Saw this in today's Picture-of-the-Day.

Granted, card tables were a bit more sturdy in 1952... but even so, I imagine this would have been quite a demonstration to see a machine up on a card table while operating!

Did any other manufacturers beyond Apex attempt this "test"?


  View Full Size



Post# 1043594 , Reply# 1   9/2/2019 at 15:22 (1,668 days old) by Unimatic1140 (Minneapolis)        

unimatic1140's profile picture
I can tell you from my own experience that my Apex Wash-a-matic is by far the most stable and solid washer I have in my collection, it never seems to have any vibration what so ever no matter what I'm washing. If the load is out of balance it will automatically bleed water from the water balloon clutch for several seconds sending the tub back into wash nutation to automatically redistribute the load and then it tries again.



Post# 1043651 , Reply# 2   9/3/2019 at 00:07 (1,668 days old) by tolivac (greenville nc)        

Who or What? would want to lift the Apex washer onto the card table?Maybe we need our forklift for this task.

Post# 1043652 , Reply# 3   9/3/2019 at 00:09 (1,668 days old) by tolivac (greenville nc)        

Surprized this washer design hasn't been "recycled" for a low water and energy use machine today.Seems like this would be worth bringing back.

Post# 1043662 , Reply# 4   9/3/2019 at 04:10 (1,668 days old) by gizmo (Victoria, Australia)        

I doubt that was any ordinary card table...

Post# 1043682 , Reply# 5   9/3/2019 at 09:40 (1,668 days old) by Kate1 (PNW)        

I’d be concerned about the weight first of all. I inherited my grandparent’s old card table, which was probably purchased in the early 1950s, and it is built better than modern ones but I certainly wouldn’t stand on it (and I’m only about 115 lbs) let alone put a washer on it and THEN let that washer run (and therefore fill with water). I’m pretty sure that if the legs didn’t buckle immediately, the top would cave in on itself. I don’t think you would even get as far as worrying about the machine vibrating.

Post# 1181650 , Reply# 6   6/1/2023 at 14:10 (300 days old) by Unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Apologies on resurrecting this old thread but I just noticed that yes indeed this washer is standing on top of a standard card table in 1953 lol. It doesn't look like this demonstration machine could fill with water but each Apex fill only uses 7.5 gallons so it wouldn't be as much weight as other washers of the time.

  View Full Size
Post# 1181653 , Reply# 7   6/1/2023 at 14:32 (300 days old) by qsd-dan (West)        

qsd-dan's profile picture

That Apex design certainly is fascinating. I wonder why it didn't take off and become more popular? Was it small capacity, mediocre cleaning results, expensive production costs, reliability issues? 


Post# 1181668 , Reply# 8   6/1/2023 at 16:56 (300 days old) by LowEfficiency (Iowa)        

lowefficiency's profile picture

Hey, look at that! It appears to have some planks (wood or the like) to distribute the weight, but they actually did it! Thanks for posting the picture.


Post# 1181695 , Reply# 9   6/2/2023 at 09:27 (300 days old) by Unimatic1140 (Minneapolis)        

unimatic1140's profile picture
Was it small capacity, mediocre cleaning results, expensive production costs, reliability issues?

I don't know for sure but Apex wasn't a major company like GE, GM/Frigidaire, Whirlpool, etc so I suspect they didn't have the resources and reach of the big guys.

My guess is that cleaning results in the Apex back then were on par with front loaders of the time which were below the average top loader due to the fact that low sudsing detergents in the early and mid 1950s weren't perfected as they are now. I'm shocked at times how well the Apex cleans stained items when I use good 21st century detergent such as Tide Free and Clear. When I use a vintage high sudsing detergent the results are not as good.

The owners manual to my '53 Apex says about detergents:

Synthetic detergents are of two kinds, non-sudsing and sudsing. Since suds tend to cushion the washing action, the non-sudsing synthetic detergents (such as "ALL", "SPIN", "SNAP", etc.) are especially efficient for washing heavily soiled or greasy clothes. Non-sudsing brands of synthetic detergents can usually be purchased in appliance or department stores, if they can not be found at the local grocery store.

The sudsing-type synthetic detergents (such as "TIDE", "SURF", "FAB", etc.) have decidedly improved cleansing qualities over soap products. They are recommended for washing clothes of average, or light soil. However, because their profuse suds tend somewhat to cushion the washing action, the non-sudsing detergents mentioned in the previous paragraph should be used if the sudsing-type (along with pre-soaking the clothes) does not achieve satisfactory results when washing heavily soiled or greasy clothes.

Apex strongly recommends the preferential use of synthetic detergents. However, if a soap powder is used when washing with the WASH·A·MATIC, then a very effective water conditioner, marketed by many leading grocery stores under the trade name, "Calgon", should be added to the soap powder to obtain satisfactory washing results and to prevent the deposit of soap curds on the clothes. "Calgon" performs the function of softening the water and, in addition, freeing the soap to remove soil from the clothes. Moreover, when "Calgon" is added to the soap powder, or added to a synthetic detergent as well, it will be found that less soap or detergent is required.



Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy