Thread Number: 80714
/ Tag: Modern Automatic Washers
The Blanket That Killed My LG Washer (WM8000HVA) . . . |
[Down to Last] |
|
Post# 1047034 , Reply# 1   10/6/2019 at 21:19 (1,634 days old) by IowaBear (Cedar Rapids, IA)   |   | |
Checkrate/Likes
 
1    
|
Post# 1047050 , Reply# 3   10/7/2019 at 06:15 (1,634 days old) by Launderess (Quiet Please, There´s a Lady on Stage)   |   | |
Checkrate/Likes
 
     
Were built to near commercial quality standards, thus not surprised your 12XX series was able to handle that blanket with ease.
That being said one reason got the Maytag wringer was to wash bulky and heavy items instead of taxing the Miele or even AEG Lavamat. My Miele is older than your 12XX and thus lacks sophiscated distribution and motor controls. It will attempt to balance a load but for so long; but when that action times out and timer says "lets rock", it's off to the races; banging, clanging and vibrating if needed. After spending >$300 for new suspension system, that on top of $$$ to have shocks replaced a few years before you can see why am not going down that rabbit hole again. The Lavamat will handle a queen sized cotton or wool blanket, but takes ages. Also build quality isn't a patch on a Miele. When queried AEG tech support up north said he couldn't recommend doing heavy blankets in this washer. If worse comes to the worse, have wash tubs and two hand cranked mangles. Then would take a cotton blanket off to laundromat and bake excess water out of fabric. *LOL* |