Thread Number: 81161
/ Tag: Classified Ad Finds
Speed Queen washer Idaho area |
[Down to Last] |
Post# 1051761   11/20/2019 at 17:54 (1,590 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
|
|
Post# 1051805 , Reply# 2   11/21/2019 at 00:09 (1,590 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
|
Post# 1051947 , Reply# 4   11/22/2019 at 13:05 (1,588 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
|
Post# 1052006 , Reply# 5   11/22/2019 at 22:24 (1,588 days old) by DavidBlazor (Astoria Oregon)   |   | |
Checkrate/Likes
 
     
We had sever problems with our speed queen read my prior posts. We purchased Kenmore Elite front loaders and are extremely pleased this far with them. |
Post# 1052015 , Reply# 6   11/23/2019 at 01:03 (1,588 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
|
Post# 1052141 , Reply# 8   11/24/2019 at 11:48 (1,586 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
I'm glad they're working out.
Do you know the model no.? I'm guessing it has a filter clean-out access cover near the bottom front panel? That's my only complaint about the older Duets, if you needed to clean out the filter, which one does need to do like once a year or so..... you have to remove the entire lower panel with a nut driver to access it. And it isn't easy to unscrew the filter front. Plus, water comes out all over.
View Full Size
|
Post# 1052189 , Reply# 9   11/24/2019 at 17:28 (1,586 days old) by combo52 (50 Year Repair Tech Beltsville,Md)   |   | |
Checkrate/Likes
 
2    
Were fairly good washers, But they tangle far too much and can take forever to balance a load, once you use one of the new larger SQ FL washers you will never look back.
Last week I refurbished a 9 YO WP [ German Duet ] that had only been used for 2 years then stored, nice enough washer with all the bells and whistles but infuriating to use if you like to watch and want to get Laundry done on any type of schedule, the 14 YO SQ FL machine in the shop next to it is 1/2 done with the 2nd load while the WP is still trying to balance a load of jeans it tangled, I have better things to do, LOL
John L. |
Post# 1052237 , Reply# 11   11/25/2019 at 01:08 (1,586 days old) by bradfordwhite (central U.S.)   |   | |
Checkrate/Likes
 
     
Super nice.
Yes, having a tube that one could lower and put into a pan to evacuate the water before opening the filter would be a huge help.
Again, I don't know why whirly-pool didn't do that.
Those are definitely supercapacity. They are 2" wider than mine.
Well I hope they continue to work well for you. I've heard good things about these. They seem to have good reviews.
CLICK HERE TO GO TO bradfordwhite's LINK |