|
Thread Number: 81708
/ Tag: Modern Automatic Washers
Washer flooding, NEED HELP ASAP! |
[Down to Last] |  |
| Post# 1057151 1/10/2020 at 15:04 (1,557 days old) by teeeem (West Coast) | ||
|
I have a Maytag MAV8557AWW, and lately, the washer has been flooding at the bottom whenever it fills the tank during the wash. Some say its washer inlet valve, but I'm not too sure. Also, rarely, but sometimes the washer doesnt spin, is this because of a bad lid switch? Thanks, Teeeem CLICK HERE TO GO TO teeeem's LINK
View Full Size
| ||
|
Post# 1057156 , Reply# 1 1/10/2020 at 15:43 (1,557 days old) by Yogitunes  (New Jersey) |
||
 | ||
| Post# 1057159 , Reply# 2 1/10/2020 at 16:06 (1,557 days old) by Repairguy (Danbury, Texas) | ||
 | ||
| Post# 1057169 , Reply# 3 1/10/2020 at 18:16 (1,557 days old) by cfz2882 (Belle Fourche,SD) | ||
|
new washer time... main seal and bearings are bad-major repair on an old used washer or replace with another washer. | ||
|
Post# 1057184 , Reply# 4 1/10/2020 at 20:46 (1,557 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
Self-Washing Baseplate Feature | ||
| Post# 1057191 , Reply# 5 1/10/2020 at 21:21 (1,557 days old) by 70skid (Texas) | ||
RIP | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
