|
Thread Number: 81731
/ Tag: Vintage Automatic Washers
Late 1980’s filter flo set |
[Down to Last] |  |
| Post# 1057396 1/12/2020 at 18:52 (1,557 days old) by Repairguy (Danbury, Texas) | ||
I acquired this set between Christmas and New Years and just had a little time to tinker with the washer today. I replaced the agitator coupling as you could turn the agitator back and forth with your hand due to the rubber separating from the coupling. Cleaned it up a little and ran a few loads. Works great! It has a pinhole in the drain hose but other than that no leaks. I believe the pan and mini basket were probably with the machine, but I believe they were thrown away because the people that bought the house they were in did not know what they were. Thought I had a picture with the matching gas extra large capacity dryer but I guess not.
Washer model: WWA8354VLWH Serial: HA125369G | ||
|
Post# 1057401 , Reply# 1 1/12/2020 at 20:01 (1,557 days old) by jons1077  (Vancouver, Washington, USA) |
||
Nice save! | ||
|
Post# 1057406 , Reply# 2 1/12/2020 at 21:07 (1,557 days old) by pulltostart (Mobile, AL) |
||
Congratulations! | ||
|
Post# 1057408 , Reply# 3 1/12/2020 at 21:53 (1,557 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
Cool A Spot-Scrubber Hi Melvin and Jon, Yes I have never seen a MOL SS before, these were fun washers.
Melvin if you need the mini-basket for this washer I probably have an extra I could send, The SS MB is a little different as it does not have holes in the bottom of the MB, but I guess you could use a regular one and seal the holes in the Bottom?
John L. | ||
| Post# 1057466 , Reply# 4 1/13/2020 at 12:23 (1,557 days old) by Repairguy (Danbury, Texas) | ||
|
Thanks for the positive comments. Here’s some pictures of the matching extra large capacity gas dryer.
Model: DDG8189VTLWH Serial: MZ306966G | ||
|
Post# 1057487 , Reply# 5 1/13/2020 at 15:49 (1,557 days old) by goatfarmer (South Bend, home of Champions) |
||
 I forgot I had a Spotscrubber, this one looks a little closer to TOL.
View Full Size
| ||
|
Post# 1057497 , Reply# 6 1/13/2020 at 18:17 (1,556 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
|
GE Extra Capacity Gas Dryer Hi Melvin, at first you got me excited thinking you had one of the 30" wide 8 CF dryers [ some of these even had a 30,000 BTU burner ] but alas this is just the 27" extra deep dryer.
I did not care for these extra deep GE dryers, because of having the heater box underneath they had a rear drum seal and a very sensitive safety thermostat so the heat cycled a lot unless you had a short and perfect vent run so you ended up with a slow dryer.
John L. | ||
| Post# 1057506 , Reply# 7 1/13/2020 at 19:55 (1,556 days old) by Repairguy (Danbury, Texas) | ||
|
Kenny, that’s a nice spot scrubber you have there. That’s the style I remember them being.
John, sorry to disappoint. I see the electric version of the dryer you speak of from time to time but I don’t think I’ve seen a gas one. I’ll keep my eyes peeled as now I want one. Were the 30” electric ones any good? I’ve worked on a few of those quite a few years ago now. Can you tell if one of these dryers is gas just by looking at the front of them? Was there an access panel? | ||
|
Post# 1057509 , Reply# 8 1/13/2020 at 20:57 (1,556 days old) by combo52 (50 Year Repair Tech Beltsville,Md) |
||
|
GE Gas Dryers | ||
| Forum Index: |
| Other Forums: |
|
|
|
|
|
Comes to the Rescue!
;){kind=link}
;){kind=link}
;){kind=link}
;){kind=link}