Thread Number: 82608  /  Tag: Ranges, Stoves, Ovens
GE oven liner parts interchange?
[Down to Last]

automaticwasher.org's exclusive eBay Watch:
scroll >>> for more items --- [As an eBay Partner, eBay may compensate automaticwasher.org if you make a purchase using any link to eBay on this page]
Post# 1067063   4/12/2020 at 12:14 (1,472 days old) by firedome (Binghamton NY & Lake Champlain VT)        

firedome's profile picture
Our '57 GE J-408 "Liberator" 40" double oven range that is presently under restoration has serious rust in the floor of the smaller oven. I'd prefer to replace the oven liner with a good part rather than repair it.

GE made this type of 40" small/large double oven range for quite a few years:

> does anyone know what other years' liners might interchange with '57/58?

> anyone have a GE 40" double oven range for parts?

Will get pics of the problem area, meantime any info or parts assistance much appreciated!

Roger A


  View Full Size



Post# 1067069 , Reply# 1   4/12/2020 at 13:18 (1,472 days old) by CircleW (NE Cincinnati OH area)        

Most likely they are the same from '57 through sometime in the 80's, when GE discontinued making them. Hotpoint 40" models beginning in the early 70's were the same as GE. After that, GE and Hotpoint brand 40" ranges were made for them by WCI, and are totaly different.

I'm sure John L. will know for sure.


Post# 1067090 , Reply# 2   4/12/2020 at 15:39 (1,472 days old) by Xraytech (Rural southwest Pennsylvania )        

xraytech's profile picture
I have a 59 J408 that you could use as a parts donor

Post# 1067091 , Reply# 3   4/12/2020 at 15:51 (1,472 days old) by firedome (Binghamton NY & Lake Champlain VT)        
thanks a ton!

firedome's profile picture
Tom: for the great info.

Sam: for your v kind offer, I'll email direct so as to not clog up the site here.


Post# 1068849 , Reply# 4   4/23/2020 at 12:50 (1,461 days old) by firedome (Binghamton NY & Lake Champlain VT)        
Xray -

firedome's profile picture
sent several eMails - just wondering if I had correct eMail address?
Please advise and thanks!


Post# 1069015 , Reply# 5   4/24/2020 at 09:10 (1,460 days old) by firedome (Binghamton NY & Lake Champlain VT)        
Tom - if preferable...

firedome's profile picture
I'd buy and can have the parts OR the whole range picked up and transported here to NY... might be the easiest solution? Please advise and thanks.

Post# 1069297 , Reply# 6   4/25/2020 at 20:31 (1,458 days old) by spacepig (Floridas Emerald Coast)        

spacepig's profile picture
Hi Roger,

I have an extra '57 but I think the inside of the ovens may have some rust. I can check for you, but I'll have to move some stuff out of the way so it may be a day or two.

Also, please document what you're doing with your stove, especially when it comes to the sensi-temp. One of the reasons I bought the spare stove was to swap the sensi-temps out, but that didn't work. Our next idea was to swap the sensi-temp burner with a regular 8" from the donor stove and use the piano key, but that didn't work out, either.

Jeannine


Post# 1070632 , Reply# 7   5/3/2020 at 13:28 (1,451 days old) by firedome (Binghamton NY & Lake Champlain VT)        
Jeannine

firedome's profile picture
thanks for your very kind offer, I only need a good oven liner for the small oven, I will eMail directly.

I'll document any repairs for sure, there's a way to convert the Automatic Calrod to standard operation, I'll put my findings on here as well.




Forum Index:       Other Forums:                      



Comes to the Rescue!

The Discuss-o-Mat has stopped, buzzer is sounding!!!
If you would like to reply to this thread please log-in...

Discuss-O-MAT Log-In



New Members
Click Here To Sign Up.



                     


automaticwasher.org home
Discuss-o-Mat Forums
Vintage Brochures, Service and Owners Manuals
Fun Vintage Washer Ephemera
See It Wash!
Video Downloads
Audio Downloads
Picture of the Day
Patent of the Day
Photos of our Collections
The Old Aberdeen Farm
Vintage Service Manuals
Vintage washer/dryer/dishwasher to sell?
Technical/service questions?
Looking for Parts?
Website related questions?
Digital Millennium Copyright Act Policy
Our Privacy Policy